Hole saw set STANLEY STA81010 — high-carbon steel (HCS) holesaws, 30 mm cutting depth, 3-piece

STANLEY STA81010 is a 3-piece hole saw set manufactured from high-carbon steel (HCS) with a cutting depth of 30 mm. The set is intended for cutting clean, circular holes in wood and other soft materials. Designed for general-purpose drilling, the collection of three sizes covers common hole-making tasks encountered in carpentry, installations and retrofit work where moderate durability and good cut quality are required.

Advantages

The high-carbon steel construction provides a balance between hardness and toughness, allowing efficient cutting in wooden substrates and soft building materials. A 30 mm cutting depth suits typical installation requirements such as fitting pipes, conduits and recessed fixtures. The three-piece assortment reduces the need to change tools frequently and supports a range of hole diameters for versatile use in workshop and on-site environments.

Suitable for

• Cutting circular holes in timber, plywood and chipboard
• Making openings for pipes, cables and conduits during installations
• Creating recessed spaces for fixtures, handles and hardware
• General-purpose drilling tasks in renovation and carpentry

Key specifications

• Material: high-carbon steel (HCS)
• Cutting depth: 30 mm
• Piece count: 3 hole saws
• Intended materials: wood and soft building materials

How to use

Select the hole saw size appropriate for the intended opening and securely mount the cup onto a compatible arbor or mandrel. Mark the centre point on the workpiece, clamp the workpiece to prevent movement and set the drill to a suitable speed for cutting wood or soft materials. Begin cutting with light, steady pressure to establish a groove, then maintain consistent feed until the hole is complete. Withdraw the hole saw periodically to clear chips and prevent clogging; finish the edge with sandpaper or a file if required.

Usage recommendations

For best performance, use with a drill that supports the arbor diameter and with appropriate safety equipment—eye protection and gloves. Avoid excessive feed pressure and overheating; periodically remove swarf from the cutting teeth to prolong tool life. Use only on materials specified to maintain cut quality and reduce wear.