Outdoor wall light Steinel L 910 LED 11 W, warm white, aluminium/plastic, PIR sensor, 180°/12 m, 220–240 V

Steinel L 910 is an outdoor wall light with an integrated 11 W LED that produces warm white light (about 3000 K). The fixture combines an aluminium and plastic housing with IP44 protection and is intended for exterior use at entrances, on façades and along pathways. An integrated PIR motion and dusk sensor provides presence detection up to 12 m within a 180° angle, enabling automatic, energy-efficient lighting from standard AC mains (220–240 V, 50–60 Hz).

Advantages

The luminaire offers efficient, long-life LED illumination with a compact design and corrosion-resistant materials for outdoor conditions. Built-in motion and dusk sensing reduce energy consumption by switching the light on only when needed, while the aluminium construction and IP44 rating ensure basic protection against weather and splash water. The 180°/12 m sensor coverage provides reliable detection of approaching people.

Suitable for

• Entrance lighting for homes and small buildings
• Illuminating walkways and paths
• Accent lighting for façades and doorways

When it may not be suitable

This wall light is not intended for fully exposed locations requiring higher ingress protection or heavy-duty vandal resistance. For large-area floodlighting or sites that need very wide-angle detection beyond 180° or ranges significantly greater than 12 m, a different fixture or additional units may be required.

Key specifications

• Light source: integrated LED, warm white (approx. 3000 K)
• Luminous flux: approximately 755 lm
• Rated power: 11 W
• Lifetime: up to 50,000 hours
• Sensor type: PIR motion and dusk sensor, 180° detection angle, up to 12 m range
• Housing: aluminium and plastic
• Ingress protection: IP44
• Supply: AC 220–240 V, 50–60 Hz

How to use

Install the Steinel L 910 on a vertical exterior wall near the area to be illuminated, following local electrical regulations and safety standards. Connect to a 220–240 V AC supply and adjust mounting height and sensor orientation to achieve the desired detection zone (up to 12 m, 180°). The integrated sensor will switch the light on automatically when motion is detected after dusk; no separate lamp replacement is required for the integrated LED during its rated lifetime.

What to consider before purchase

• Check that the IP44 rating and materials meet the exposure conditions at your installation site
• Confirm the 180° detection angle and 12 m range suit the layout and mounting height
• Ensure compatibility with local mains voltage (220–240 V, 50–60 Hz)

Usage recommendations

Mount the fixture at a height and angle that focus the sensor on pedestrian approaches rather than busy roads or nearby vegetation to reduce false triggers; for wider coverage, use multiple units spaced along the façade or pathway.