Staple pins Stickn B.N.T 471405 — 1.8 mm wire, 70 mm leg, 20 mm crown, 215 mm strip, 110 g pack

Stickn B.N.T 471405 staple pins are heavy-duty fasteners designed for applications where a long leg and a relatively wide crown are needed. These staples feature a 1.8 mm wire diameter, 70 mm leg length and a 20 mm crown width and are supplied on 215 mm strips. Pack weight is 110 g. They are intended for use with compatible staplers and are suitable for attaching fabric, insulation, packaging materials and lightweight construction materials where secure penetration and holding power are required.

Advantages

The 1.8 mm wire provides increased strength and resistance to bending during insertion while the 70 mm leg length allows penetration through thick materials. A 20 mm crown offers broader coverage to distribute holding force and reduce material tearing. Supplied on 215 mm strips for sequential loading, these staple pins are compatible with staplers designed for long-leg staples, providing consistent placement and faster fastening in repetitive tasks.

Suitable for

• Upholstery and furniture repairs requiring long-leg staples
• Insulation installation where staples must pass through thick layers
• Packaging and pallet securing of bulky or layered goods
• Light construction tasks such as fastening sheet materials or vapor barriers

Key specifications

• Wire diameter: 1.8 mm
• Leg length: 70 mm
• Crown width: 20 mm
• Strip length: 215 mm
• Pack weight: 110 g
• Packaging: staple pins supplied on strips for stapler loading

How to use

Use these staple pins with a compatible heavy-duty stapler or stapling gun designed for long-leg staples of the specified dimensions. Load the 215 mm strips into the stapler according to the tool manufacturer’s instructions, align the staple crown over the workpiece, and apply steady pressure or trigger action to drive the legs through the materials. Ensure the stapler is set for the correct driving force to avoid incomplete clinch or excessive deformation of the staple legs.

Usage recommendations

Before use, verify stapler compatibility with 70 mm leg length and 20 mm crown width. For best results on layered or thick materials, test a sample fasten to confirm penetration and holding strength. Wear appropriate personal protective equipment and follow the stapler manufacturer's safety guidelines.