Outdoor wall lighting PowerNeed SWL-15 LED IP65 White

The PowerNeed SWL-15 is an outdoor wall light combining LED illumination, solar charging and disinfection functions in a compact, weatherproof housing. It integrates 20 white LEDs and 6 UVC LEDs with a built-in solar panel and rechargeable lithium-ion battery, providing automatic dusk-to-dawn operation, motion-activated boost and a portable flashlight mode. The unit is IP65 rated and designed for wall mounting at typical installation heights around 1.6 m.

Advantages

The device offers solar-powered, wireless operation with a high-efficiency solar panel that charges the internal battery, ALS+TCS technology to maintain illumination through cloudy conditions, and dual lighting modes including motion-activated full output to conserve energy. Built-in UVC LEDs and an ozone generation function enable surface and air disinfection when spaces are unoccupied. The lamp housing is waterproof (IP65) and impact-resistant (IK10), with low operating costs and compact dimensions suitable for varied outdoor locations.

Suitable for

• Outdoor wall illumination for entrances, facades and small architecture
• Temporary disinfection of unoccupied rooms such as bathrooms, kitchens or pet rooms
• Areas without mains power where solar lighting and USB charging are needed
• Portable use as a flashlight for short-distance tasks

Key specifications

• Light sources: 20 LED (white) + 6 UVC LEDs (260–280 nm)
• Nominal light output: 1000 lm (motion-activated) / 20 lm and 150 lm portable modes
• Color temperature: 4000 K, CRI Ra ≥ 80
• Beam angle: 120°
• Solar panel: 1 W, PV size 80 × 72 mm
• Battery: 7.4 Wh Li‑Ion; USB charging 2 A; charging time ≈ 10 h (ideal sun)
• Lighting autonomy: up to 10 days (depending on settings and conditions)
• Sensors: PIR motion sensor up to 5 m; twilight sensor (≤10 Lux ON, ≥50 Lux OFF)
• Protection: IP65; impact resistance IK10
• Installation height: ~1.6 m; product dimensions: 225 × 81 × 72 mm; weight: 500 g

How to use

Mount the SWL-15 on a vertical surface at the recommended height (about 1.6 m) ensuring the solar panel faces direct sunlight without significant shading. The unit charges the internal battery by day and switches on automatically at dusk. For motion-activated full output, leave the motion sensor enabled; the lamp will emit higher output when movement is detected. To use disinfection, activate the UVC/ozone function only when the room is unoccupied, then ventilate the space after the cycle by opening windows or doors to remove residual ozone before re-entering.

Usage recommendations

Charge times quoted assume optimal sunlight and no shading; partial shading, low sun angle or poor weather will increase charging time. Use the UVC/ozone disinfection mode only in unoccupied spaces and follow ventilation guidance after use to ensure safety.