Solar lamp Superfire FF13-C 22W 300lm — outdoor LED solar light, model FF13-C

The Superfire FF13-C solar lamp is an outdoor LED light designed for façades, gardens, entrances, garages and balconies. It delivers 300 lm brightness from a 22 W module, runs on a built‑in polysilicon solar panel and includes a motion sensor, three lighting modes and adjustable rotating heads for aiming the light. The lamp has IP54 water resistance and a 2400 mAh rechargeable battery that supports up to 12 hours of operation after a full charge.

Advantages

The lamp provides energy-independent illumination using an integrated solar panel and a 2400 mAh battery, reducing the need for wired power. Its motion sensor and three selectable modes (motion-activated with 20 s delay, motion-activated with soft dimming, and continuous low-level illumination) allow flexible control via the included remote. The rotating heads enable precise positioning, and the IP54-rated ABS housing resists rain and snow for outdoor use.

Suitable for

• Garden paths and beds
• Building façades and walls
• Entrances, porches and balconies
• Garages and outdoor storage areas

Key specifications

• Manufacturer: Superfire
• Model: FF13-C
• Power: 22 W
• Brightness: 300 lm
• Battery: 2400 mAh / 3.7 V (18650 x 2)
• Operating time: up to 12 hours
• Charging time (solar): up to 6 hours
• Solar panel: polysilicon 6 V / 1.6 W
• Waterproof rating: IP54
• Operating temperature: -10°C to 40°C
• Dimensions: 260 x 100 x 140 mm
• Material: ABS
• Weight: approx. 430 g

How to use

Mount the Superfire FF13-C on a stable surface where the solar panel receives direct sunlight for optimal charging. Adjust the rotating heads to aim light where needed. Use the remote control to select one of the three modes: motion-activated with 20 s switch-off, motion-activated with soft dimming, or continuous low illumination. After a full solar charge (about 6 hours under sufficient sunlight), the lamp can operate for up to 12 hours depending on mode and environmental conditions.

Usage recommendations

Place the lamp so its solar panel faces south or the direction with the most sun exposure and avoid shading from trees or buildings. Clean the solar panel periodically and ensure the mounting angle leaves the motion sensor unobstructed to maintain reliable detection and runtime.