Strip light Synergy21 S21-LED-001008 — Universal LED strip 90 W, 5,000 mm, 24 V, RGB + warm white

Synergy21 S21-LED-001008 is a universal LED strip light with a length of 5,000 mm, rated at 90 W and designed for 24 V DC operation. The flexible strip contains 300 LEDs and offers colour-changing capability including red, green, blue, white and warm white. With a compact profile of approximately 12 mm width and 4.5 mm thickness, this strip is suitable for installation in narrow channels and for a wide range of accent, architectural and decorative lighting applications, both indoors and outdoors when installed in appropriate housing.

Advantages

The strip provides high luminous density across its 5-metre length while maintaining low operating voltage at 24 V, reducing power-run risks compared with higher voltage solutions. Colour mixing of RGB plus separate warm white and white LEDs enables both dynamic colour effects and neutral or warm white illumination from the same product. The narrow cross-section allows installation in constrained profiles and under trim, and the flexible design simplifies routing around corners and along linear runs.

Suitable for

• Accent lighting for coves, shelves and display cases
• Architectural outlines and façade highlights when used in appropriate housings
• Decorative ambient lighting in living spaces, retail or hospitality settings
• Under-cabinet or plinth lighting where a slim profile is required

Key specifications

• Power consumption: 90 W (total for 5,000 mm strip)
• Operating voltage: 24 V DC
• LED count: 300 LEDs across 5,000 mm
• Available colours: Red, Green, Blue, White and Warm White (colour changing)
• Dimensions: approx. 5,000 mm length × 12 mm width × 4.5 mm thickness
• Dimmable: yes (requires compatible dimmer/controller)
• Mounting: flexible strip suitable for channels, adhesive backing or clips (use appropriate housing for outdoor use)

How to use

Measure and prepare the intended installation route, ensuring the chosen power supply and controller are rated for 24 V DC and able to handle the 90 W load. Cut the strip only at marked cut points, and make secure electrical connections using compatible soldering, connectors or manufacturer-recommended terminals. If the strip is to be used outdoors or in damp locations, install it inside a suitable IP-rated profile or conduit. Use a compatible RGB + white controller to select colours and adjust brightness; follow the controller documentation for wiring and addressing.

Usage recommendations

For stable colour and brightness across long runs, plan power injection points and keep cable runs within the controller and supply limits. Use aluminum profiles for heat dissipation and mechanical protection, and select a 24 V power supply with at least 10–20% headroom above the 90 W rating to account for voltage drop and to extend component life.