Universal strip light Synergy21 S21-LED-A00156 — LED 24W, 5000 mm, multi-color, white

Synergy21 S21-LED-A00156 is a universal indoor strip light with integrated LED sources rated at 24 W. The linear 5000 mm profile in a white housing provides multi-colour output and is designed for DC operation. With a slim cross-section (approximately 10 mm wide and 3 mm thick), this single-piece strip light is intended for installations that require a long, continuous run of LED illumination for general ambient, accent or under-cabinet lighting.

Advantages

The integrated LEDs deliver a consistent multi-colour light output along the entire 5 m length, reducing the need for multiple fixtures and providing an even appearance. The white profile blends into many interior environments while the low-profile dimensions allow installation in narrow recesses and cabinets. Running on DC power, the strip offers stable operation and reduced flicker when paired with a compatible driver. Supplied as a single-piece unit, it simplifies alignment and minimizes visible joints in continuous installations.

Suitable for

• Continuous ambient lighting in residential or commercial interiors
• Under-cabinet illumination in kitchens and worktops
• Accent or cove lighting where a multi-colour effect is desired
• Long runs in display cases, shelving, or corridor lighting

Key specifications

• Power consumption: 24 W integrated LED
• Length: 5000 mm
• Housing colour: white
• Light colour: multi-colour (adjustable/multi-tone output)
• Profile dimensions: approximately 10 mm width, 3 mm thickness
• Mounting: designed for inline or recessed mounting in narrow profiles
• Power type: DC operation (requires compatible DC driver or controller)

How to use

Measure and prepare the installation channel or surface to accommodate the 5000 mm length and slim profile. Ensure a compatible DC driver or controller is selected according to the strip's nominal power and voltage requirements. Fix the strip light in place using appropriate mounting clips or adhesive suitable for the surface material, and route wiring to the driver following local electrical regulations. Connect the strip to the driver/controller, verify polarity, and test the multi-colour function before finalizing cable management and any diffusers or covers.

Usage recommendations

Use a driver with adequate power margin and recommended output voltage to prevent thermal stress and colour shifts. For long continuous runs, allow for ventilation and avoid placing insulation directly over the strip. If cutting or joining is required, follow manufacturer guidelines for permitted cut points and approved connectors; when in doubt, plan the layout to use the strip as a single 5 m piece to maintain uniform light output.