Synergy21 S21-LED-B00057 is a universal indoor LED strip light 5000 mm long that provides continuous linear illumination with a dual cool and warm white output. The flexible strip contains 600 LEDs mounted on an 11×3 mm substrate and is designed for 24 V DC operation. With a rated power of 48 W and an energy class A efficiency, this LED tape is suitable for accent, under-cabinet, cove and general-purpose indoor lighting where low power consumption and a slim, unobtrusive profile are required.
Advantages
The strip combines two white tones — cool and warm — in a single flexible ribbon, enabling a range of white-light atmospheres without changing fixtures. Its slim 11×3 mm cross-section allows installation in narrow channels and shallow profiles. At 5000 mm length with 600 LEDs, the light output is continuous and even along the run, reducing shadowing commonly seen with lower-density strips. Operation at 24 V DC improves safety and compatibility with common low-voltage LED drivers, while the product’s low power draw supports energy-efficient installations.
Suitable for
- Under-cabinet kitchen illumination
- Display and retail shelving lighting
- Cove and indirect ceiling lighting
- Accent lighting for worktops and furniture
- General ambient lighting in residential and commercial interiors
Key specifications
- Length: 5000 mm
- LED quantity: 600 LEDs
- Power consumption: 48 W (total)
- Input voltage: 24 V DC
- Light colours: Cool white and Warm white (integrated)
- Strip dimensions: 11 mm width × 3 mm thickness
- Installation environment: Indoor use
- Energy efficiency class: A
How to use
Cut the strip only at designated cut marks to maintain correct circuit segments and ensure proper functionality. Mount the strip on a clean, dry surface using the adhesive backing or appropriate mounting clips, making sure to allow for ventilation along the run. Connect the strip to a compatible 24 V DC driver or adapter, observing correct polarity. If dimming or tone change between cool and warm white is required, integrate a compatible controller or driver that supports the strip’s electrical and colour configuration.
Usage recommendations
For long-term performance, avoid bending the strip sharply and maintain recommended cutting intervals. Use a 24 V DC constant-voltage driver sized for at least the strip’s 48 W power consumption plus a safety margin (typically 10–20%). For installations in visible channels, consider an aluminum profile with a diffuser to improve heat dissipation, protect the strip and achieve more uniform light distribution.
