Universal strip light Synergy21 S21-LED-F00017 — LED ambience, 5000 mm, 72 W, 12 V, warm white, 600 LEDs

Synergy21 S21-LED-F00017 is a universal LED strip light designed for indoor ambience lighting. The flexible strip is 5000 mm long, 10 mm wide and 2.5 mm thick and integrates 600 LEDs that emit warm white light. Powered by 12 V DC with typical power consumption of 72 W, this strip is suitable for accent, decorative and indirect lighting in residential, office and retail settings. The operating temperature range from −25 to 60 °C makes it suitable for standard indoor installations where reliable warm white illumination is required.

Advantages

The strip provides continuous warm white illumination from a high LED density (600 LEDs on 5 m), which ensures smooth, evenly distributed light without noticeable hotspots. Low-voltage 12 V operation simplifies connection to common LED drivers and reduces risk compared with mains-voltage fixtures. Its slim dimensions (10 mm x 2.5 mm) allow flexible placement in narrow channels, under cabinets, shelving and coves. The product’s rated power of 72 W for the complete 5 m length gives a clear basis for selecting a compatible power supply and estimating energy consumption.

Suitable for

• Accent lighting under kitchen cabinets and shelves
• Decorative or cove lighting in living rooms and bedrooms
• Indirect illumination in retail displays and shop fittings
• Office ambient or task-background light strips

Key specifications

• Light source: 600 LEDs over 5000 mm
• Light colour: Warm white
• Length: 5000 mm
• Width: 10 mm
• Thickness: 2.5 mm
• Rated power (typical): 72 W (complete strip)
• Supply voltage: 12 V DC
• Operating temperature range: −25 °C to 60 °C

How to use

Plan the installation length and measure available power supply capacity before installation. Cut only at designated cut points if a shorter length is required and ensure correct polarity when connecting to a 12 V DC driver sized to provide at least the strip’s rated power. Use appropriate connectors or soldered joints and secure the strip to a clean, dry surface using the adhesive backing or mounting clips where mechanical fixation is required. Allow for ventilation around the strip if installed in confined spaces to stay within the specified operating temperature range.

Usage recommendations

For consistent performance, use a regulated 12 V DC LED power supply with adequate wattage margin (recommended at least 10–20% above 72 W). Avoid bending the strip sharply and do not expose the strip to moisture unless an IP-rated protection is applied. Test a short section before final installation to confirm colour and brightness match project requirements.