Universal strip light Synergy21 S21-LED-F00032, LED ambience, 5000 mm, 24 V, 144 W, warm white, 600 LEDs

Synergy21 S21-LED-F00032 is a universal indoor LED strip light designed for ambient and accent illumination. The flexible strip measures 5000 mm long, 15 mm wide and 2.2 mm thick and incorporates 600 warm-white LEDs. It operates from a 24 V DC supply with a typical power consumption of 144 W, making it suitable for continuous decorative lighting in residential and commercial interiors. The strip is supplied with an adhesive backing for direct mounting onto clean, dry surfaces and is intended for indoor use.

Advantages

The warm-white LEDs deliver uniform, glare-free illumination optimized for ambience and accent purposes. A long 5 m length with a high LED density provides consistent light distribution without frequent joins. Low-voltage 24 V operation reduces heat generation and simplifies installation with compatible drivers. The slim, flexible profile allows installation in narrow channels, coves, under cabinets or behind panels for concealed lighting while the adhesive backing enables straightforward surface mounting.

Suitable for

• Ambient room lighting in living rooms, bedrooms and hallways
• Under-cabinet and task-accent lighting in kitchens and worktops
• Architectural or furniture accent lighting for shelves, displays and recesses
• Indirect cove lighting and backlighting for panels or signage

Key specifications

• LED colour temperature: warm white
• Length: 5000 mm; width: 15 mm; thickness: 2.2 mm
• LED quantity: 600 LEDs
• Operating voltage: 24 V DC
• Typical power consumption: 144 W (total strip)
• Mounting: adhesive backing for indoor surfaces
• Usage environment: indoor ambience and accent lighting

How to use

Measure and prepare the installation surface, ensuring it is clean, dry and free of dust or grease. Cut the strip only at the marked cutting points if a shorter length is required and maintain correct polarity when connecting to a compatible 24 V DC power supply or driver. Affix the strip using the adhesive backing, pressing evenly to ensure full contact. Route and secure connection cables to avoid strain on solder joints and electrical contacts. For continuous operation, select a power supply rated to provide sufficient current for the entire length of the strip.

Usage recommendations

Use a regulated 24 V DC LED driver sized with at least 10% headroom above the strip's typical power consumption to ensure stable performance. Avoid exposure to moisture and direct outdoor conditions; install the strip in well-ventilated locations to allow heat dissipation. If dimming is required, choose a compatible dimmer or controller designed for constant-voltage LED strips and confirm compatibility with the 24 V system.