Universal LED strip light Synergy21 S21-LED-F00037, green, 5000 mm, 300 LEDs, 12 V, 24 W

Synergy21 S21-LED-F00037 is a universal green LED strip light 5000 mm long with 300 LEDs, designed for ambient and accent illumination in both indoor and sheltered outdoor environments. The strip runs from a 12 V DC supply with a typical power consumption of 24 W and features a slim 11 mm width and 5 mm thickness for easy installation in profiles, coves or behind furniture. It is intended for decorative, pathway and accent lighting in residential and commercial settings and is rated to operate in temperatures from -25 °C to 65 °C.

Advantages

The green LED strip offers even colour output along its 5 m length thanks to 300 evenly spaced LEDs, providing consistent illumination for long runs. Low-voltage 12 V operation reduces electrical risk and allows compatibility with common LED drivers and controllers. Its compact cross-section and flexible substrate enable installation on curved surfaces or within narrow channels, while the moderate 24 W power draw ensures energy-efficient operation for decorative and accent tasks.

Suitable for

• Accent and decorative lighting in living rooms, retail displays and hospitality areas
• Pathway and stair-edge illumination for visual guidance
• Backlighting for shelving, cabinets and signage
• Seasonal or event lighting where a continuous green colour is required

Key specifications

• Light colour: green
• Length: 5000 mm
• LED quantity: 300 LEDs
• Operating voltage: 12 V DC
• Typical power consumption: 24 W
• Strip width: 11 mm
• Strip thickness: 5 mm
• Operating temperature range: -25 °C to 65 °C

How to use

Measure and prepare the mounting surface, ensuring it is clean and dry before fixing the strip. Cut the strip only at the marked cut points if a shorter length is required, and use appropriate connectors or soldering to maintain reliable electrical contact. Connect the strip to a compatible 12 V DC driver or controller with sufficient current capacity for a 24 W load. If installed outdoors or in exposed locations, mount inside a suitable protective channel or enclosure to shield from moisture and mechanical damage. Observe correct polarity when wiring and power up the system to verify uniform illumination along the entire length.

Usage recommendations

For long continuous runs, place the power feed near the centre or at multiple points to avoid voltage drop and colour shift. Use a constant-voltage 12 V LED driver sized at least 20% above the 24 W load to allow for driver efficiency and headroom. For outdoor or humid environments, install the strip inside an IP-rated profile or use appropriate sealing methods to maintain longevity.