Universal LED strip light Synergy21 S21-LED-F00162 96 W 24 V 5 m RGBW 300 LEDs

The Synergy21 S21-LED-F00162 is a 5 metre universal LED strip light designed for ambient, accent and decorative lighting. This 24 V DC strip integrates 300 LEDs along a slim 15 mm × 4.5 mm profile and delivers up to 96 W of power. The RGBW configuration produces red, green, blue plus warm white and neutral white tones, allowing flexible colour mixing and white-temperature options for interior and exterior installations where a low-profile, high-output linear light source is required.

Advantages

The strip combines high luminous density with a compact cross-section to provide even illumination across long runs while remaining easy to conceal in coves, under cabinets or architectural profiles. Operating from a 24 V supply and rated at 96 W, it supports long continuous lengths with reduced voltage drop compared with lower-voltage variants. The RGBW LED layout enables both saturated colour effects and accurate white rendering for mixed-use applications. Its universal design is suitable for protected outdoor and indoor locations when installed according to IP and mounting requirements.

Suitable for

• Ambient and accent lighting in residential and commercial interiors
• Under-cabinet and shelf illumination
• Architectural cove and linear feature lighting
• Protected outdoor runs such as covered terraces and facades
• Colour-changing decorative installations and stage accents

Key specifications

• Length: 5000 mm
• Power consumption: 96 W (total strip)
• Operating voltage: 24 V DC
• LED count: 300 LEDs
• Colour capability: RGBW (Red, Green, Blue, Warm white, White)
• Profile dimensions: 15 mm × 4.5 mm
• Dimmable: compatible with appropriate 24 V dimming controls

How to use

Measure and prepare the mounting surface ensuring it is clean, dry and suitable for adhesive or mechanical fixing. Cut the strip only at the marked cut points to maintain circuit integrity. Connect the strip to a compatible 24 V DC power supply and, where colour control or dimming is required, use a controller rated for RGBW strips that matches the strip's voltage and power. Route wiring to avoid sharp bends and protect connections from moisture if installed in exposed or protected outdoor locations. Observe polarity and follow manufacturer guidelines for maximum run lengths and supply placement to avoid excessive voltage drop.

Usage recommendations

For best performance, mount the strip on an aluminium extrusion or other heat-dissipating surface when running long lengths or operating near the maximum power rating. Use appropriately rated 24 V power supplies with adequate headroom (allowing for inrush and 10–20% margin) and place power feeds along the run to reduce voltage drop. Use compatible RGBW controllers to access both white and colour channels and ensure IP-rated connectors or protection when installing in outdoor or humid environments.