Recessed lighting spot Synergy21 Prometheus LED 8.8 W, 605 lm, 4000 K, IP65, 230 V, black/white

Recessed Synergy21 Prometheus LED spot designed for outdoor use. The integrated LED module consumes 8.8 W and produces approximately 605 lm with a neutral white 4000 K colour temperature. The luminaire is rated IP65 for protection against dust and water jets, and it is designed to operate from a 230 V mains supply. The fixture is available in black or white finish and is intended for discreet in-ground or step installations where robust weather resistance and neutral colour rendering are required.

Advantages

The Synergy21 Prometheus LED combines low energy consumption with a solid lumen output to deliver efficient accent and pathway illumination. With an IP65 rating and an integrated LED rated for long life, the unit offers reliable outdoor performance in wet environments. The neutral 4000 K colour temperature provides clear, natural-looking light suitable for architectural highlighting without strong colour bias. The recessed form factor reduces glare and preserves clean sightlines.

Suitable for

• Outdoor pathways and walkways
• Porches, entrances and vestibules
• Architectural façade and wall washing
• Garden borders and recessed step lighting

Key specifications

• Light source: integrated LED, 8.8 W power consumption
• Luminous flux: 605 lm
• Colour temperature: 4000 K (neutral white)
• Beam angle: 60°
• Rated lifetime (LED): approximately 35,000 hours
• Ingress protection: IP65 (dust tight, protected against water jets)
• Supply voltage: 230 V mains
• Finish options: black or white
• Mounting type: recessed / in-ground installation

How to use

Install the recessed Synergy21 Prometheus LED spot into a suitably prepared housing or mounting sleeve following all applicable local electrical and building regulations. Ensure the installation location is compatible with an IP65-rated luminaire and that the cable entry and connections are sealed against moisture. Connect to a 230 V supply and verify correct polarity and earthing where required. Aim the fixture as intended prior to final sealing and backfilling; the recessed design is intended to minimise glare and integrate into paving, steps or landscaping features.

Usage recommendations

Use the fixture for accent, pathway and architectural lighting where neutral white 4000 K is desired. Avoid burying the unit under soil or debris that would inhibit heat dissipation; maintain clearances recommended for recessed luminaires. For long-term performance, inspect seals and joints periodically and replace if mechanical damage or water ingress is detected.