Brush wheel Szczotpol model N254, diameter 60 mm, 6 mm shank

Szczotpol disc brush model N254 with a 60 mm diameter and a 6 mm shank is a compact abrasive brush designed for use with drills, die grinders and rotary tools that accept a 6 mm mounting shaft. The wheel-shaped construction and dense abrasive filaments allow targeted cleaning and finishing of small or hard-to-reach surfaces on metal and other materials. The product is intended for tasks such as rust and paint removal, deburring and preparing surfaces for further treatment.

Advantages

The compact 60 mm diameter brush provides access to confined areas while the 6 mm shank fits common rotary tool chucks. The wheel geometry concentrates abrasive action on the contact area, enabling controlled material removal and finishing. The brush is suitable for repeated short operations and spot treatments and is compatible with a wide range of handheld and bench-mounted rotary tools that accept a 6 mm shank.

Suitable for

• Removing rust and loose paint from metal surfaces
• Deburring edges and removing flash from small parts
• Cleaning weld seams and preparing metal for painting or coating
• Surface finishing and light polishing of metals and non-ferrous materials
• Detail cleaning in tight or recessed areas

Key specifications

• Brush shape: wheel / disc
• Diameter: 60 mm
• Shank diameter: 6 mm
• Intended use: surface cleaning, rust and paint removal, deburring, finishing
• Compatible tools: drills, die grinders, rotary tools with 6 mm shank

How to use

Mount the brush securely in the tool chuck or collet designed for a 6 mm shank. Set the tool to an appropriate speed for the material and task — moderate speeds for general cleaning and lower speeds for delicate finishing. Apply steady, light pressure and move the brush across the workpiece to avoid localized overheating or excessive material removal. For best results, keep the brush moving and avoid pressing the wheel flat against the surface for prolonged periods.

Usage recommendations

Use appropriate personal protective equipment such as eye protection, gloves and respiratory protection when working with airborne dust or flaky coatings. Check the tool manufacturer’s speed limits and do not exceed the recommended maximum rotational speed for the brush. Inspect the brush before use and replace if filaments are excessively worn or the shank is bent.