Brush disc Szczotpol TO150, 150 mm diameter, 22 mm bore, steel wire

Szczotpol TO150 is a 150 mm diameter brush disc with a 22 mm central bore, equipped with steel wire filaments for aggressive surface treatment. It is designed for use on bench or angle grinders that accept a 22 mm arbor and is intended for mechanical removal of rust, paint, scale and burrs from metal components. The disc geometry and steel-wire construction make it suitable for heavy-duty cleaning and preparation of ferrous surfaces before welding, painting or assembly.

Advantages

The steel-wire filaments provide high abrasion resistance and fast material removal while maintaining brush shape under load. The 150 mm diameter gives a balance between access to confined areas and sufficient coverage for medium-size workpieces. A standard 22 mm bore ensures compatibility with many common grinders and arbor adapters, allowing reliable mounting and stable operation during prolonged use.

Suitable for

• Removing rust and paint from metal parts
• Deburring and edge blending after cutting or machining
• Surface preparation prior to welding, brazing, or coating
• Cleaning scale, oxidation and welded seams

Key specifications

• Diameter: 150 mm
• Central bore (arbor): 22 mm
• Filament material: steel wire
• Intended use: metal surface cleaning and preparation

How to use

Mount the brush disc on a compatible bench or angle grinder with a 22 mm arbor, ensuring the tool is unplugged or its battery removed during fitting. Tighten the disc according to the grinder manufacturer’s instructions and check that the brush is securely fixed and runs true before powering the tool. Operate the grinder at the recommended speed range for wire brushes, apply moderate pressure and move the disc steadily across the workpiece to avoid concentrated wear or gouging. Allow the brush to do the cutting—excessive pressure shortens filament life and can reduce effectiveness.

Usage recommendations

Wear appropriate personal protective equipment including eye protection, gloves and respiratory protection when working with steel wire brushes. Avoid using the disc on non-ferrous or delicate surfaces where wire filaments may cause damage. Inspect the brush before each use and replace if filaments are excessively worn or if the assembly shows signs of imbalance or damage.