Audio cable TB Print 3.5mm jack to 2x RCA (Cinch), 2.5 m, black

TB Print audio cable with a 3.5 mm jack to two RCA (Cinch) connectors is a 2.5 m black interconnect designed to link devices with a 3.5 mm stereo output to equipment with left and right RCA inputs. The cable provides a simple wired connection for transmitting stereo audio from smartphones, laptops or portable players to stereo systems, AV receivers, amplifiers and similar devices. The 3.5 mm plug and two RCA plugs are fitted to standard housings and are intended for straightforward, plug-and-play use.

Advantages

The cable's 2.5 m length offers a balance between reach and manageable cable routing, allowing placement flexibility without excess tangling. Its black jacket provides a neutral aesthetic that blends with most audio setups. Using dedicated RCA connectors for left and right channels maintains stereo separation when connecting portable sources to home or car audio systems. The compact 3.5 mm plug fits most headphone and line outputs, enabling compatibility with a wide range of consumer electronics.

Suitable for

• Connecting smartphones, tablets or laptops to a stereo receiver or amplifier
• Feeding portable audio players into home stereo systems or powered speakers
• Temporary or permanent multimedia installations where a 3.5 mm to RCA connection is needed
• Car audio setups or adapters requiring RCA inputs

Key specifications

• Connector A: 3.5 mm stereo male
• Connector B: 2 × RCA (Cinch) male
• Cable length: 2.5 metres
• Cable colour: black
• Channel support: stereo (left and right)

How to use

Insert the 3.5 mm jack into the headphone or line output of the source device and connect the left and right RCA plugs to the corresponding inputs on the receiver, amplifier or powered speakers (matching white/black or white/red colour coding as applicable). Ensure both devices are powered down when making connections to avoid pops or noise, then power on the audio system and set the source input on the receiver to the appropriate RCA input. Adjust playback volume on the source and the receiving device to achieve the desired listening level.

Usage recommendations

For consistent audio quality, avoid running the cable parallel to mains power cables over long distances to reduce potential interference. When not in use, coil the cable loosely to prevent sharp bends; do not pull on the connectors when disconnecting. If you encounter hum or noise, check connector seating and try swapping inputs or using cleaner contact points on devices.