Microphone cable TC-Helicon GoXLR MIC CABLE XLR female to XLR male, 3 m

TC-Helicon GoXLR MIC CABLE is a balanced 3 m microphone cable with an XLR female connector to XLR male connector designed for analog audio connections between microphones and mixers, audio interfaces or preamps. The cable is intended for studio and live use where a stable signal path, low noise and reliable mechanical connection are required. The 3 m length offers a compromise between flexibility on stage or in the studio and minimal signal degradation for standard setups.

Advantages

The cable provides balanced audio transmission that helps reduce interference and hum over the 3 m run. XLR female to XLR male connectors feature secure locking mechanisms to prevent accidental disconnection during performances or recording sessions. The construction focuses on consistent impedance and low noise to preserve microphone signal integrity across typical professional audio setups.

Suitable for

• Connecting dynamic or condenser microphones to mixers, audio interfaces or preamps
• Studio tracking, podcasting and voiceover work
• Live sound reinforcement, stage and venue setups
• Routing microphone signals in broadcast or streaming rigs

When it may not be suitable

This cable is intended for analog microphone connections and does not provide digital audio, power for devices beyond standard microphone phantom power delivered through balanced XLR lines, or USB connectivity. For runs significantly longer than 3 m, or for environments with extreme electromagnetic interference, a longer cable with specific shielding or a different routing solution may be preferable.

Key specifications

• Connector type: XLR female to XLR male
• Cable length: 3 m
• Signal type: Balanced analog microphone
• Intended use: Studio and live sound
• Features: Locking XLR connectors, low-noise design

How to use

Insert the XLR female connector onto the microphone output and plug the XLR male connector into the microphone input of the mixer, audio interface or preamp. Ensure connectors click into their locking positions to secure the connection. When using condenser microphones, confirm that the receiving device provides the required phantom power and switch it on only after secure connection. Avoid sharp bends and tight coils; route the cable away from power cables and high-current devices to minimise interference.

What to consider before purchase

• Confirm that both your microphone and target device use standard XLR microphone connectors.
• Evaluate whether 3 m length suits your setup or if a shorter/longer cable is needed.
• Consider cable routing and shielding needs in environments with potential electromagnetic interference.

Usage recommendations

To maintain signal quality, store the cable coiled without tight kinks, disconnect by pressing the connector latch before pulling, and avoid running the cable parallel to mains power lines. For critical recording or live applications, test connections before sessions to ensure low-noise performance.