Brass Elbow TECE 25 mm x 1" GZ threaded fitting (767526)

Brass Elbow TECE 25 mm x 1" GZ threaded fitting (767526) is a 90° plumbing connector designed to join a 25 mm copper or plastic pipe to a 1" male threaded component. Manufactured from brass, the fitting provides a compact right-angle transition between differing pipe diameters and thread standards and is intended for use in water distribution and heating system installations where a durable, corrosion-resistant elbow is required.

Advantages

The brass construction offers good mechanical strength and corrosion resistance in typical domestic and commercial plumbing environments. The 90° geometry allows space-saving routing of pipes and simplifies alignment between a 25 mm line and a 1" threaded fixture. The threaded male end provides a secure, detachable connection compatible with standard G-type pipe threads, while the plain 25 mm side enables soldering, press-fitting or use with appropriate compression fittings depending on installation practice.

Suitable for

• Domestic and commercial water distribution systems
• Hot water heating circuits and radiator connections
• Installations requiring a compact 90° transition between 25 mm pipe and 1" threaded components
• Plumbing repair and retrofit work where differing connection standards must be joined

Key specifications

• Angle: 90° elbow
• Material: brass (corrosion-resistant plumbing grade)
• Connection A: 25 mm pipe connection (suitable for solder, press, or compatible compression fittings)
• Connection B: 1" male G-type threaded end
• Typical applications: potable water and heating systems
• Installation orientation: right-angle, space-saving fitting

How to use

Select the appropriate joining method for the 25 mm side—soldering, press-fitting or compression—consistent with the material of the pipe and local codes. Prepare the pipe end by cutting square, deburring and cleaning before assembly. Thread the 1" male G-type end into the mating female threaded component using suitable sealing material on the threads if required by the installation (e.g., PTFE tape or pipe joint compound) and tighten to the specified torque for the system. Verify alignment and secure pipe supports to prevent undue stress on the elbow.

Usage recommendations

Use this brass elbow in systems compatible with brass components and follow local regulations for potable water and heating installations. Avoid excessive torque on threaded joints and ensure proper support to minimize mechanical strain. When used with dissimilar metals, consider appropriate measures to prevent galvanic corrosion, such as dielectric unions or protective coatings.