Cutting Disc for Stone Techniflex 230x2.5 mm, 22.23 mm bore, model M418-230-2.5-22C36R

Techniflex cutting disc for stone 230×2.5 mm with a 22.23 mm bore is an abrasive wheel designed for thin, precise cuts in natural and artificial stone. Intended for use with standard 230 mm angle grinders, this disc is suitable for tasks that require controlled material removal and clean edges on masonry, tiles and stone elements. The 2.5 mm thickness balances cutting speed and minimal material loss, while the reinforced bonding ensures consistent performance during renovation and on-site cutting jobs.

Advantages

This cutting disc provides a fine kerf for accurate trimming with reduced chipping on many stone surfaces. It is engineered for durability under regular use, delivering steady cutting progress and predictable wear. Compatibility with common 230 mm grinders and a standard centre bore allows quick mounting and straightforward replacement. The design offers a compromise between cutting efficiency and disc life, making it suitable for both intermittent professional use and serious DIY projects.

Suitable for

• Masonry and brick cutting
• Ceramic and porcelain tile trimming
• Natural stone shaping and profiling
• Renovation and repair work on facades and floors
• On-site stone cutting where a thin kerf is required

Key specifications

• Disc diameter: 230 mm
• Disc thickness: 2.5 mm (thin kerf)
• Centre bore diameter: 22.23 mm
• Application: abrasive cutting of natural and artificial stone
• Compatible with standard 230 mm angle grinders

How to use

Mount the disc on a compatible 230 mm angle grinder according to the grinder manufacturer’s instructions, ensuring the centre bore and flanges match and the disc is secured with the correct flange and nut. Use appropriate personal protective equipment including eye, ear and respiratory protection. Operate the grinder at the recommended speed range and apply steady, even pressure—avoid forcing the disc through the material. Allow the disc to cut at its own pace to minimize overheating and chipping; pause periodically for inspection when performing extended cuts.

Usage recommendations

Use the disc for dry cutting of stone where thin, precise cuts are needed. For extended cutting sessions, consider intermittent cutting to reduce heat build-up. Always check the disc condition before use and replace it if cracks, excessive wear or warping are visible. Store in a dry, cool place away from direct sunlight and avoid impacts that could damage the abrasive rim.