Cutting and grinding disc for steel Techniflex 125 x 1.0 x 22.2 mm

Techniflex cutting and grinding disc for steel, 125 x 1.0 x 22.2 mm, is designed to perform precise metalworking tasks on steel components. The 1.0 mm thin profile minimises material loss and produces narrow kerfs for accurate cutting. Compatible with 125 mm angle grinders that accept a 22.2 mm arbor, this disc is suitable for both cutting and surface grinding operations on steel sheet, pipes and fabricated parts.

Advantages

The thin 1.0 mm thickness delivers precise cuts with reduced heat buildup and minimal burr formation. Abrasive composition is selected for effective steel removal while maintaining disc stability during operation. Standard 22.2 mm bore ensures easy mounting on most 125 mm angle grinders. The compact diameter provides good access in confined spaces and allows for controlled grinding or trimming near edges and welds.

Suitable for

• Cutting steel sheets and plates
• Trimming edges and removing burrs
• Surface grinding and weld seam removal
• Cutting steel rods, pipes and profiles

Key specifications

• Disc diameter: 125 mm
• Thickness: 1.0 mm for fine, precise cuts
• Bore diameter: 22.2 mm for standard angle grinders
• Primary material application: steel
• Intended operations: cutting and surface grinding

How to use

Mount the disc securely on a compatible 125 mm angle grinder with a 22.2 mm spindle, following the tool manufacturer's instructions and using the correct flanges and guards. Allow the grinder to reach full speed before engaging the workpiece and use steady, even pressure; avoid forcing the disc. For cutting, make smooth, continuous passes; for grinding or weld removal, use light passes and control the contact angle to prevent overheating. Replace the disc if it becomes damaged, warped or excessively worn.

Usage recommendations

Wear appropriate personal protective equipment including safety glasses, face shield, gloves and hearing protection. Secure the workpiece before cutting or grinding and ensure adequate ventilation when working on coated or painted surfaces. Observe the maximum operating speed of both the disc and the grinder; do not exceed rated RPM. Store discs flat in a dry area to preserve performance.