Cutting Disc Techniflex T1A 125×3.2×22 mm – abrasive metal cutting wheel

Techniflex T1A 125×3.2×22 mm is an abrasive cutting disc engineered for use with 125 mm angle grinders to perform straight, precise metal cuts. The flat T1A design and 3.2 mm thickness provide a balance between cutting speed and control, while the 22 mm bore fits common grinder spindles. Suitable for cutting steel and other ferrous materials, this disc is intended for workshop, construction and maintenance tasks where efficient metal separation is required.

Advantages

The wheel’s flat profile and moderate thickness offer reduced vibration and improved cut accuracy compared with thicker blades, while the abrasive formulation maintains consistent cutting performance over repeated use. The 125 mm diameter allows access to tighter spaces than larger discs and provides good control on handheld angle grinders. The standard bore size ensures compatibility with most consumer and professional grinders.

Suitable for

• Cutting steel bars, rods and profiles
• Separating sheet metal and metal panels
• On-site metalwork in construction and renovation
• General workshop and maintenance cutting tasks

Key specifications

• Diameter: 125 mm
• Thickness: 3.2 mm
• Bore (arbour) diameter: 22 mm
• Disc type: flat T1A abrasive cutting wheel
• Material compatibility: steel and other ferrous metals

How to use

Mount the disc on a compatible 125 mm angle grinder with a 22 mm spindle, ensuring the wheel is correctly seated and the fastening flange is tightened to the manufacturer’s torque specification. Operate the grinder at the rated speed for the disc, using steady, controlled movements to make straight cuts. Allow the abrasive to do the cutting; avoid excessive force and maintain a consistent feed rate. Inspect the wheel before each use for cracks or damage and replace it if any defects are found.

Usage recommendations

Wear appropriate personal protective equipment including eye protection, hearing protection, gloves and respiratory protection when cutting metal. Use clamping or secure the workpiece to minimise movement. Do not use the disc for grinding, sanding, or at speeds exceeding the disc’s rated RPM.