Cutting Disc Techniflex T1A 350×3.5×32 A24TBF PRO — abrasive metal/plastic cutting wheel

Techniflex T1A 350×3.5×32 A24TBF PRO is a flat abrasive cutting disc designed for use with angle grinders. With a 350 mm diameter, 3.5 mm cutting thickness and 32 mm bore, this wheel is intended for high-speed cutting of various metals and plastics where a thin kerf and precise, straight cuts are required. The A24TBF abrasive grade provides a balance of cutting speed and wheel life for routine construction, fabrication and repair tasks.

Advantages

The disc delivers a consistent cutting line with minimal vibration thanks to its uniform flat profile and balanced construction. Its 3.5 mm thickness reduces material waste and allows faster cutting compared with thicker wheels while maintaining stability. The abrasive mix and bonded structure are selected to provide steady cutting performance across ferrous metals, non-ferrous metals and many engineering plastics.

Suitable for

• Cutting steel profiles, sheet metal and rebar
• Severing non-ferrous metals such as aluminum and copper
• Trimming or cutting plastic pipes and panels
• On-site construction, metal fabrication and repair workshops

Key specifications

• Diameter: 350 mm
• Thickness: 3.5 mm
• Bore (arbor) size: 32 mm
• Abrasive grade: A24TBF
• Wheel type: flat cutting disc for angle grinders
• Intended use: high-speed abrasive cutting of metal and plastic

How to use

Install the disc on an angle grinder compatible with a 32 mm arbor and secure it according to the tool manufacturer’s instructions. Verify that the grinder’s maximum speed rating matches or exceeds the permitted RPM of the disc. Use steady, controlled passes with light to moderate feed pressure; allow the abrasive to cut rather than forcing the wheel. Maintain a firm two-handed grip and appropriate cutting angle to keep the cut straight and to minimise binding.

Usage recommendations

Always wear appropriate personal protective equipment: safety goggles or a face shield, hearing protection, gloves and protective clothing. Inspect the disc for cracks or damage before each use and do not use a damaged wheel. Ensure adequate ventilation and clamp or support workpieces to prevent movement during cutting.