Milling Machine Techrebal FP8 with 63 x 1.4 x 16 cutting parameters, DE/EB ECCO

Techrebal MILLING MACHINE FP8 with cutting parameters 63 x 1.4 x 16 and marking DE/EB ECCO is a precision milling cutter designed for tasks that require a 63 mm diameter cutter, 1.4 mm thickness and a 16 mm bore. The tool is intended for use in machining operations where consistent cutter dimensions and stable rotation are important, including profile milling, slotting and finishing passes on suitable materials.

Advantages

The FP8 milling cutter offers a defined combination of diameter, thickness and bore that simplifies setup and tool selection for operations needing those exact dimensions. Its geometry and marking help ensure repeatable mounting and predictable cutting behavior. The cutter is suitable for precision work where small radial cuts and controlled chip formation are required.

Suitable for

• Profile cutting and contour milling with a 63 mm cutter diameter
• Slotting and shallow grooving where 1.4 mm thickness is required
• Finishing passes that demand consistent cutter runout and bore fit
• Light to moderate machining of metals and select woodworking tasks compatible with the cutter material and coating

When it may not be suitable

This cutter is not intended for heavy stock removal or high feed roughing where a thicker or larger-diameter tool would be more appropriate. It may be unsuitable for materials or cutting conditions that require special coatings, carbide grades, or coolant strategies not specified for this tool. Confirm the cutter material and coating compatibility with the workpiece and machining parameters before use.

Key specifications

• Cutter diameter: 63 mm
• Cutter thickness: 1.4 mm
• Bore diameter: 16 mm
• Primary applications: profile milling, slotting, finishing
• Mounting: through bore for compatible arbor or adapter

How to use

Install the milling cutter on an appropriate arbor or adapter that matches the 16 mm bore and secure it according to the machine manufacturer's instructions. Verify concentricity and runout after mounting and set spindle speed and feed rates according to the material being machined and the cutter's dimensions. Use light passes when making the first cuts to confirm cutting behavior, then adjust feed and depth incrementally to optimize surface finish and tool life. Apply coolant or air blast as appropriate for chip evacuation and heat control.

What to consider before purchase

• Confirm that 63 mm diameter and 1.4 mm thickness match your intended cutting profiles
• Verify arbor or adapter compatibility with a 16 mm bore
• Check material and coating compatibility with the workpiece and machining conditions
• Ensure your machine can safely handle the recommended spindle speeds and feeds for this cutter

Usage recommendations

Use this milling cutter for controlled finishing and precise slotting tasks; start with conservative speeds and feeds, monitor tool wear, and maintain proper chip removal to extend cutter life and achieve consistent results.