Double-sided Carpet Tape TEKA model 531299 on PP film 38 mm x 5 m

Double-sided Carpet Tape TEKA model 531299 on PP film 38 mm x 5 m is a double-sided adhesive tape with a polypropylene (PP) carrier designed to secure carpets, runners and other floor coverings. The tape is 38 mm wide and 5 m long, providing a narrow, strong bond that helps prevent slipping and lateral movement on both textile and hard floor surfaces in homes and commercial spaces.

Advantages

The PP film carrier gives the tape good dimensional stability and allows controlled adhesive application on both sides. Adhesive on each face ensures reliable holding of carpet edges and seams to underlying subfloors, minimizing folds and movement. The narrow 38 mm width is suitable for targeted fixing without bulky profiles, and the 5 m roll length is convenient for small to medium installations or spot repairs.

Suitable for

• Fixing carpet runners and area rugs to hard floors (wood, vinyl, tile).
• Securing wall-to-wall carpeting edges and seams to reduce movement.
• Temporary or semi-permanent positioning of thin underlays and non-slip pads.
• Spot repair and edge fastening in apartments, offices, hotels and retail spaces.

When it may not be suitable

This tape is intended for narrow, localized fixing and may not be suitable as the primary method for securing very large or heavy carpets and broadloom installations where full-width adhesive application is required. It is not formulated for long-term outdoor exposure or continuous contact with wet surfaces; prolonged moisture may reduce bond strength.

Key specifications

• Carrier material: polypropylene (PP) film.
• Tape width: 38 mm.
• Roll length: 5 m.
• Adhesive: pressure-sensitive adhesive on both sides.
• Typical applications: textile floor coverings, runners, area rugs.

How to use

Prepare the floor by cleaning and drying the surface to remove dust, grease and loose particles. Cut the tape to the required lengths, peel off the protective backing and apply the adhesive side to the substrate, pressing firmly to ensure contact. Remove the top liner and position the carpet or runner, smoothing out wrinkles and pressing along the taped areas to secure the bond. For best results, apply firm pressure along the full length of the tape and allow the adhesive to settle before subjecting the area to heavy traffic.

What to consider before purchase

• Intended surface type (textile or hard flooring) and cleanliness requirements.
• Need for a narrow fixing width (38 mm) versus broader coverage for large installations.
• Indoor use suitability and avoidance of prolonged moisture exposure.
• Compatibility with delicate floor finishes—test in an inconspicuous area if concerned about adhesive residues.

Usage recommendations

For reliable results, use the tape on clean, dry floors and apply pressure evenly. Use multiple strips for larger runners and check adhesive compatibility with sensitive floor finishes before full application.