Mounting Tape TESA 56064-00003 2.5m White 19mm

TESA 56064-00003 is a self-amalgamating silicone mounting tape in white, 2.5 m long and 19 mm wide. The tape does not stick to other surfaces but fuses to itself to form an immediate, airtight and water-resistant seal. It is designed for indoor and outdoor use and offers high resistance to pressure, UV exposure and a wide temperature range.

Advantages

The silicone composition creates a seamless, insulating layer that remains flexible under temperature extremes from -60°C to +260°C. The tape resists up to 12 bar of pressure, tolerates immersion and oily environments, and withstands voltages up to 8000 V. Its UV resistance and weatherproof properties make it suitable for long-term outdoor applications.

Suitable for

• Sealing pipe joints and fittings
• Temporary electrical insulation and cable bundling
• Repairing hoses and hoses under pressure
• Outdoor sealing exposed connections and fittings
• DIY repairs, automotive and marine applications

Key specifications

• Brand: Tesa
• MPN: 56064-03-00
• EAN: 4042448294760
• Length: 2.5 m
• Width: 19 mm
• Material: Self-amalgamating silicone
• Pressure resistance: up to 12 bar
• Temperature range: -60°C to +260°C
• Voltage resistance: up to 8000 V
• UV and weather resistant

How to use

Cut the required length, remove any loose dirt or grease from the area to be sealed if possible, and wrap the tape tightly around the object, stretching slightly so the tape fuses to itself. Overlap each turn by approximately 50% to ensure a continuous, airtight seal. For electrical insulation, ensure sufficient overlap and multiple layers as needed to reach the required dielectric strength.

Usage recommendations

For best performance, apply at room temperature and avoid stretching excessively beyond the tape's elastic limit. Not intended to adhere to other surfaces; it must be wrapped onto itself to form a seal. For permanent structural bonding use appropriate adhesive tapes or mechanical fasteners.