Electric convector heater Thermoval T 17 2500 W IP24, dimensions 890 x 450 x 80 mm

Thermoval T 17 is an electric convector heater with nominal output of 2500 W and IP24 splash protection. With compact external dimensions of 890 x 450 x 80 mm, the unit is intended for wall mounting or free-standing placement and provides convective heat delivery to raise ambient temperature quickly in indoor spaces. The design and IP24 rating make it suitable for rooms where occasional moisture or splash exposure may occur while remaining optimized for residential and light-commercial environments.

Advantages

The heater combines high nominal power and a slim profile to deliver effective air circulation and rapid heat distribution without occupying significant floor space. IP24 splash protection increases installation flexibility near sinks or utility areas compared with non-protected convectors. The device supports both wall-fixed and floor-positioned use, enabling straightforward adaptation to different room layouts and heating needs.

Suitable for

• Living rooms and bedrooms that require quick warm-up
• Home offices and small commercial offices
• Workshops, garages and utility rooms with occasional moisture exposure
• Supplementary heating in larger spaces or poorly insulated areas

Key specifications

• Nominal heating power: 2500 W for rapid heat output
• Ingress protection: IP24 splash protection suitable for damp environments
• Mounting options: wall-mountable or free-standing placement
• Dimensions (H x W x D): 890 x 450 x 80 mm, slim profile
• Heating principle: convective heating for uniform air circulation

How to use

Install the convector on a load-bearing wall using appropriate fasteners or place it on the floor in a stable position away from combustible materials and obstructions to airflow. Connect the heater to a suitable power outlet rated for the device and follow any local electrical regulations; do not use extension cords as a permanent power solution. Operate controls according to the supplied user interface to set desired room temperature and allow the unit to run until the ambient temperature stabilizes. Regularly check that air inlets and outlets are not blocked to maintain efficient convective flow.

Usage recommendations

Position the unit so incoming and outgoing airflow is unobstructed and keep a clear zone around the heater. For rooms with higher humidity, ensure the IP24 protection is maintained by avoiding direct water jets and following cleaning instructions in the manual. Use the convector as primary or supplementary heating depending on room size; in poorly insulated spaces, consider combining with insulation measures for best energy efficiency.