TIKKURILA PAINT OPTIVA CERAMIC BA 0.9 L — interior ceramic-based paint, 0.9L

TIKKURILA PAINT OPTIVA CERAMIC BA 0.9 L is an interior ceramic-based paint formulated for walls and ceilings. It delivers a washable, easy-to-clean surface with ceramic reinforcement that improves abrasion and stain resistance. The paint is suitable for residential and commercial indoor spaces where durable, hygienic surfaces are required, and it is intended for use in rooms such as kitchens, corridors and living areas.

Advantages

OPTIVA CERAMIC BA combines ceramic additives and a balanced binder system to create a hard-wearing paint film that resists scuffs and light stains while remaining simple to maintain. The composition supports good adhesion to properly prepared mineral and previously painted surfaces, offers uniform coverage in light and medium tones, and dries to a consistent finish suitable for regular cleaning. Its formulation is intended for interior applications and designed to deliver long-term surface integrity under normal indoor conditions.

Suitable for

• Interior walls and ceilings in residential properties
• Kitchens and dining areas where washable surfaces are needed
• Hallways, corridors and stairwells subject to frequent contact
• Living rooms and bedrooms where durability and easy maintenance are desired
• Commercial indoor spaces with moderate wear and cleaning requirements

Key specifications

• Volume: 0.9 L
• Type: Ceramic-reinforced interior paint
• Application areas: Walls and ceilings
• Performance: Improved abrasion and stain resistance, washable surface
• Finish: Matt to low-sheen (interior wall finish)
• Coverage: Typical coverage for interior paints (depends on substrate and application method)
• Suitable topcoat/undercoat compatibility: Compatible with properly prepared mineral substrates and previously painted surfaces

How to use

Ensure substrates are clean, dry and free of loose material, grease and salts before painting. Prepare surfaces by filling cracks and sanding glossy areas; apply an appropriate primer if required by the substrate type or when changing from a darker to a lighter colour. Stir the paint thoroughly before use and apply with brush, roller or suitable spray equipment following manufacturer guidance for thinning and drying times. Maintain recommended film thickness and allow sufficient drying time between coats to achieve an even, washable finish.

Usage recommendations

For best results on new plaster or highly absorbent surfaces, use a compatible primer to ensure uniform absorption and adhesion. Test the chosen colour and finish on a small area before full application. Clean tools with water immediately after use and ventilate the room until the paint has fully dried.