Paint TIKKURILA OPTIVA SATIN MATT 7 BA 2.7L waterborne interior satin‑matt paint

TIKKURILA OPTIVA SATIN MATT 7 BA 2.7L is a waterborne interior paint formulated for walls and ceilings. Supplied in a 2.7-litre container, this satin‑matt paint provides a low‑sheen surface that balances a soft appearance with practical washability. It is intended for living spaces and public interiors where a durable, low‑reflective finish is required for repainting or new applications.

Advantages

The paint offers a satin‑matt finish that reduces light reflection while maintaining a smooth, even look. Being waterborne, it has low odour during application and dries to a stable film that is easy to clean. The product delivers consistent coverage and adhesion on properly prepared interior substrates and supports long‑term appearance retention in moderate wear environments.

Suitable for

• Living rooms, bedrooms and corridors
• Ceilings in residential and commercial interiors
• Repainting over previously painted interior walls
• New plasterboard, painted plaster and masonry substrates after proper priming

Key specifications

• Type: waterborne emulsion paint
• Finish: satin‑matt (low sheen)
• Volume: 2.7 litres
• Recommended use: interior walls and ceilings
• Properties: washable surface, low odour, good coverage

How to use

Ensure surfaces are clean, dry and sound before application. Remove loose paint, grease and dust and repair any defects. Prime absorbent or patched areas with a suitable primer according to substrate type. Stir the paint thoroughly before use and apply with brush, roller or spray equipment recommended by the manufacturer. Apply one or two coats as needed to achieve uniform coverage, allowing adequate drying time between coats and ensuring good ventilation during drying.

Usage recommendations

For best results, test the paint on a small area to confirm colour and finish. Use appropriate primers on new plaster, bare masonry or previously stained surfaces. Maintain recommended film thickness and drying times stated by the manufacturer and clean tools with water immediately after use.