Interior paint TIKKURILA PAINT OPTIVA SATIN MATT 7 BC 0.9 L

TIKKURILA PAINT OPTIVA SATIN MATT 7 BC 0.9 L is an interior waterborne paint formulated for walls and ceilings. The product gives a satin-matt finish with low sheen, intended for standard renovation and maintenance in homes and apartments. Supplied in a compact 0.9 litre container, this paint is suitable for creating even, easy-to-clean surfaces in living rooms, bedrooms, corridors and other interior spaces where a subtle, low-reflective appearance is required.

Advantages

The satin-matt formulation balances a soft low-sheen aesthetic with good surface durability. As a waterborne paint, it has relatively low odor and fast drying properties compared with solvent-based options. The product is designed to provide uniform coverage and a smooth appearance on properly prepared interior substrates, and it can be applied with common tools such as rollers or brushes. Its compact packaging supports small to medium repair and renovation tasks.

Suitable for

• Painting interior walls in living rooms and bedrooms
• Ceiling surfaces in apartments and houses
• Maintenance coats and spot repair work
• Rooms where a low-sheen, easy-to-clean surface is preferred

Key specifications

• Type: waterborne interior paint
• Finish: satin-matt (low sheen)
• Volume: 0.9 L
• Application: brush, roller, or spray
• Recommended substrates: prepared plaster, drywall, previously painted surfaces
• Typical use: walls and ceilings

How to use

Ensure surfaces are clean, dry and free from loose material, grease or mildew. Prime bare or highly absorbent substrates if recommended for the surface type. Stir the paint thoroughly before use and apply with a brush, roller or suitable spray equipment. Apply evenly and allow appropriate drying time between coats as indicated by standard waterborne paint practice; a second coat may be necessary for full coverage. Clean tools with water immediately after use.

Usage recommendations

For best results, work at moderate room temperature and humidity, follow surface preparation guidelines, and test a small area to confirm colour and finish before completing the entire surface.