Sandpaper sheets Topex 230 x 280 mm K40 grit pack of 10 (08A422)

Topex sandpaper sheets 230 x 280 mm K40 grit in a pack of 10 are coarse abrasive sheets designed for aggressive material removal and rapid shaping. These sheets are intended for manual sanding or use with compatible sanding holders and blocks. The open design and coarse grit make them suitable for removing old paint, shaping rough wood, deburring metal and preparing surfaces for subsequent finer sanding or finishing.

Advantages

Coarse K40 abrasive provides fast stock removal and efficient shaping on wood and metal. The 230 x 280 mm format fits common sanding holders and blocks, offering good coverage and control during manual work. Supplied as a pack of 10, the sheets provide continuity of work without frequent reorders and are convenient to replace when a sheet becomes worn. The material resists clogging under aggressive use and maintains cutting performance on rough surfaces.

Suitable for

• Removing old paint, varnish and coatings from wood and metal
• Rapid shaping and leveling of rough timber and composite materials
• Deburring and edge blending on metal parts
• Preparation of rough surfaces before finer sanding and finishing

Key specifications

• Sheet dimensions: 230 x 280 mm
• Abrasive grit: K40 (coarse)
• Quantity per pack: 10 sheets
• Intended use: manual sanding or with compatible sanding holders/blocks
• Suitable materials: wood, metal, painted surfaces, composites

How to use

Select an appropriate sanding holder or use the sheet by hand, securing the sandpaper to provide stable contact with the work surface. Apply even pressure and move the sheet along the grain on wood or across the workpiece for shaping, taking care to check progress frequently. Replace the sheet when abrasive performance decreases or if the sheet becomes clogged or damaged. Use progressively finer grits after initial shaping with K40 to achieve the desired surface finish.

Usage recommendations

For safety and best results, wear appropriate personal protective equipment such as dust mask, eye protection and gloves. When sanding metal or painted surfaces, ensure adequate ventilation and consider using dust extraction with compatible sanding tools. Start with coarse K40 for heavy removal and follow with medium and fine grits to refine the surface before finishing or painting.