VOREL 04682 flooring spacer 100 pc(s)

VOREL 04682 flooring spacer pack contains 100 reusable cups designed for use with a rapid tile leveling system. These cups work together with leveling strips to reduce tile lippage and secure tiles in position while adhesive sets, supporting a professional, even finish for floors and walls. The set complements existing tile leveling kits and can be used to replenish worn or missing cups.

Advantages

The reusable design reduces waste and lowers replacement frequency compared with single-use solutions. Compatibility with strips and other system components enables consistent joint widths and reliable alignment for tiles from thin mosaics up to thicker slabs. The product helps maintain a minimum joint thickness of 0.75 mm and supports tile thicknesses from 3 mm to 40 mm, which makes it versatile for a wide range of tile types and sizes.

Suitable for

• Laying large-format floor tiles where reduced lippage is required
• Wall and floor tile installations that use a rapid tile leveling system
• Repairing or replenishing components of an existing leveling kit

Key specifications

• Pack quantity: 100 cups
• Reusable cup design
• Minimum joint thickness supported: 0.75 mm
• Suitable tile thickness range: 3 mm to 40 mm
• Intended use: with leveling strips in rapid tile leveling systems
• Applications: floor and wall tiling

How to use

After applying tile adhesive, insert leveling strips beneath the edges of the first tile so that each side has a strip in position. Align the adjacent tile against the strips, then place a cup over the embedded strips at the tile joints. Use the appropriate pliers to tension the strips by pulling them through the cups until tiles are flush and properly aligned. Allow the adhesive to cure to the manufacturer’s recommended time, then remove strips and cups by cutting or pulling them out with the pliers as specified for the leveling system.

Usage recommendations

Use these cups together with matching strips and pliers from the same tile leveling system to ensure correct fit and function. Adhere to adhesive and tile manufacturer curing times before removing the system components. Store the cups in a dry place and inspect for damage before reuse.