Clamp TOYA YT-64307 — width 180 mm, depth 180 mm, height 45 mm

TOYA YT-64307 is a bench clamp with a 180 mm jaw width, 180 mm arm length and 45 mm jaw opening height. Supplied as a single unit, the clamp secures workpieces for woodworking, metalworking and assembly tasks. It provides stable holding force for cutting, drilling, gluing and positioning operations in workshop or hobby use, and can be mounted to a work surface for fixed clamping.

Advantages

The clamp features an adjustable angle in the range 30–90° with an indexed scale for precise positioning and eccentric clamps to lock the selected angle securely. Constructed primarily from durable nylon plastic, it combines low weight with sufficient strength for general workshop tasks. Its compact dimensions and the ability to screw the clamp onto the work surface make it versatile for both temporary and more permanent setups.

Suitable for

• Holding small to medium workpieces during cutting and sawing
• Securing parts for drilling and tapping operations
• Fixing components during gluing and assembly
• Use on workbenches in hobbyist and light workshop environments

Key specifications

• Jaw width: 180 mm
• Arm length / depth: 180 mm
• Jaw opening height: 45 mm
• Adjustable angle range: 30–90° with scale
• Locking mechanism: eccentric clamps for angle fixation
• Maximum width of clamped material (approx.): 90 mm
• Material: nylon plastic
• Mounting: can be screwed to work surface

How to use

Position the clamp on the work surface and secure it with screws if a fixed mounting is required. Open the jaws to accommodate the workpiece up to the specified jaw opening height and place the material between the jaws. Set the required clamping angle using the indexed scale, then lock the angle with the eccentric clamps. Tighten the clamping mechanism until the workpiece is held firmly but without excessive force that could damage the material. For removal, release the clamp and lift the workpiece clear.

Usage recommendations

For best results, use the clamp on a flat, stable work surface and verify that mounting screws are tightened securely. Avoid exposing the nylon plastic components to direct flame or prolonged high temperatures. Inspect the eccentric locks and threaded parts regularly for wear and ensure the clamp is appropriate for the size and hardness of the material to prevent deformation or slippage.