TP-Link Omada 1M Direct Attach SFP+ Cable for 10 Gigabit Connections, 1 m, DAC, SFP+ to SFP+
Short description
Cheapest delivery:
Unisend LV
Product information
Description
The TP-Link Omada 1M Direct Attach SFP+ Cable is designed for reliable 10 Gigabit network connections over short distances. Featuring a 1-meter DAC cable type with SFP+ connectors on both ends, this direct attach copper cable provides a cost-effective and high-speed solution for connecting switches, routers, and other networking equipment within data centers and enterprise server rooms.
Advantages
This direct attach copper cable offers a highly reliable and energy-efficient method for linking compatible networking hardware without the need for separate transceiver modules. By integrating SFP+ connectors directly into the cable assembly, it minimizes signal loss and potential points of failure. The passive twin-ax design ensures low latency and steady performance for high-bandwidth data transfers over short reaches. Its robust construction and standardized black finish make it well-suited for organized rack deployments where durability and clean cable management are essential.
Suitable for
- Connecting 10G switches within the same server rack
- Linking network routers and core switches across adjacent racks
- Data center interconnections requiring short-range high-speed data transmission
- Enterprise server room network expansions
When it may not be suitable
This cable is not suitable for network connections that exceed one meter in distance, as passive DAC cables are specifically engineered for very short-range links. Additionally, it cannot be used with equipment that lacks SFP+ compatible ports or relies on different physical interfaces such as RJ45 or fiber optic connectors without appropriate media converters.
Key specifications
- Cable length: 1 m
- Cable type: DAC
- Connector 1: SFP+ Male
- Connector 2: SFP+ Male
- Data transfer rate: 10 Gbit/s
- Color: Black
How to use
To use the TP-Link Omada 1M Direct Attach SFP+ Cable, ensure that both networking devices are powered off or follow standard hot-swapping procedures if supported by your hardware vendor. Remove the protective dust caps from the SFP+ connectors on both ends of the cable. Align the connector with the SFP+ slot on your switch, router, or network interface card and gently push it inward until the locking mechanism clicks securely into place. To disconnect, pull the latch mechanism or pull tab on the connector to release the lock before pulling the cable straight out of the port.
What to consider before purchase
- Verify that your networking equipment features available SFP+ ports supporting 10 Gigabit speeds
- Measure the precise physical distance between the devices to ensure one meter is sufficient
- Check compatibility lists of your switch or router manufacturer to ensure proper hardware recognition
Usage recommendations: Handle the cable with care during installation, avoiding sharp bends or excessive tension near the connector ends to maintain optimal signal integrity and longevity.
- Data transfer rate:
- 10 Gbit/s
- Connector 1:
- SFP+
- Connector 2:
- SFP+
- Connector 1 gender:
- Male
- Connector 2 gender:
- Male
- InfiniBand protocol:
- Yes
Logistics data
- Harmonized System (HS) code:
- 85447000
Other features
- Cable length:
- 1 m
Packaging data
- Package weight:
- 340 g
- Package height:
- 60 mm
- Package depth:
- 315 mm
- Package width:
- 295 mm
Packaging content
- Quantity per pack:
- 1 pc(s)
Operational conditions
- Storage temperature (T-T):
- -40 - 80
- Operating temperature (T-T):
- 0 - 70
Features
- Product colour:
- Black
Performance
- Cable type:
- DAC
Product comparison
The TP-Link Omada 1M Direct Attach SFP+ Cable is compared with similar 10 Gigabit networking solutions from brands such as BlueOptics, HP, LevelOne, and OEM. All of these products are passive Direct Attach Copper (DAC) cables featuring SFP+ connectors, designed to provide high-speed, short-range connections between network switches, routers, and servers within data centers and server rooms. The main differences lie in cable lengths, brand ecosystem compatibility, and specific design details that influence deployment within server racks.
⚙️ The specifications table below compares key parameters such as cable length, connector type, supported data rate, and practical deployment characteristics for each cable.
| Parameter | TP-Link Omada 1M | BlueOptics EX-SFP-10GE-DAC-50CM | HP HPE X242 10G 1m | BlueOptics QFX-SFP-DAC-1M-BL | LevelOne 10Gbps SFP+ 1m | BlueOptics MCP2103-X01AB | Practical significance of differences |
|---|---|---|---|---|---|---|---|
| Data rate | 10 Gbit/s | 10 Gbit/s | 10 Gbit/s | 10 Gbit/s | 10 Gbit/s | 10 Gbit/s | All cables deliver identical high performance for low-latency 10 Gigabit connections. |
| Cable type & connectors | DAC, SFP+ to SFP+ | Passive DAC, SFP+ | Passive DAC, SFP+ to SFP+ | SFP+ male-to-male | Twinax DAC, SFP+ | Passive Twinax DAC, SFP+ | All models use reliable copper twinax technology for direct short-range links without separate transceivers. |
| Cable length | 1 m | 0.5 m | 1 m | 1 m | 1 m | 30 m | Length dictates maximum reach between units: 0.5 m suits immediate adjacent ports, while 1 m fits standard rack-to-rack or top-of-rack links. |
◎ The suitability table below evaluates which product fits specific user needs, deployment scenarios, and hardware environments.
| Use case | Recommended product | Why |
|---|---|---|
| Connecting HP switches within a rack over a 1-meter distance | HP HPE X242 10G 1 m | Ensures guaranteed hardware compatibility within an all-HP networking environment. |
| Linking networking gear inside a TP-Link Omada ecosystem setup | TP-Link Omada 1M Direct Attach SFP+ Cable | Optimally matches TP-Link Omada infrastructure requirements at a standard one-meter reach. |
| Ultra-short intra-rack connection (0.5 m) | BlueOptics EX-SFP-10GE-DAC-50CM | Helps minimize cable clutter when connecting tightly stacked equipment in the same rack. |
The TP-Link Omada 1M Direct Attach SFP+ Cable differs from alternatives primarily through its alignment with the TP-Link Omada ecosystem and its practical one-meter length for standard rack connections. It is most suitable for network administrators deploying TP-Link hardware who need a reliable, cost-effective 10 Gigabit link between close-range devices, whereas alternative models should be chosen based on specific brand ecosystem requirements or specialized distance needs.








