TP-Link TL-SF1048 Unmanaged Rackmount Fast Ethernet Network Switch with 48 RJ-45 Ports and 9.6 Gbit/s Switching Capacity
Short description
Cheapest delivery:
Unisend LV
Esto — pay in 6 equal parts
Product information
Description
The TP-Link TL-SF1048 Unmanaged Rackmount Fast Ethernet Network Switch is designed to provide reliable and efficient connectivity for demanding workgroups and departmental networks. Equipped with 48 RJ-45 ports supporting 10 and 100 Mbps speeds, this switch allows seamless integration of multiple wired end devices such as personal computers, printers, and network access points. Featuring a robust 19-inch rack-mountable steel case with a 1U form factor, it fits effortlessly into standard server racks and network cabinets. The device utilizes innovative energy-efficient technology that adjusts power consumption based on link status and cable length, helping to reduce operational power usage while maintaining high performance. With a switching capacity of 9.6 Gbit/s and an 8000-entry MAC address table, it handles packet forwarding smoothly and efficiently across the network.
Advantages
This network switch offers a straightforward plug-and-play installation experience that requires no complex configuration or management software. The integration of auto MDI and MDIX technology eliminates the necessity for crossover cables, while auto-negotiation on every port automatically detects the link speed of connected devices to ensure optimal compatibility and performance. The non-blocking switching architecture ensures that data packets are forwarded and filtered at full wire-speed for maximum throughput. Furthermore, IEEE 802.3x flow control for full-duplex mode and backpressure for half-duplex mode effectively alleviate traffic congestion during heavy data transmission. Energy-saving technologies help minimize power consumption, and compliance with environmental standards ensures an eco-friendly operation.
Suitable for
- Connecting multiple desktop computers and workstations in an office environment
- Integrating networked peripherals such as printers, scanners, and IP devices
- Expanding wired local area networks in small to medium-sized business departments
- Setting up stable departmental connectivity within standard 19-inch server racks
This switch may not be suitable for high-bandwidth environments that require Gigabit or 10-Gigabit Ethernet speeds, as its ports are limited to Fast Ethernet 10/100 Mbps performance. Additionally, because it is an unmanaged device without support for Power over Ethernet or advanced VLAN configuration, it cannot supply electrical power to connected IP cameras or access points, nor can it support advanced network management and traffic segmentation requirements.
Key specifications
- 48 Fast Ethernet RJ-45 ports supporting 10 and 100 Mbps speeds
- Switching capacity of 9.6 Gbit/s
- MAC address table with 8000 entries
- 19-inch rack-mountable 1U steel case
- Supports IEEE 802.3i, IEEE 802.3u, and IEEE 802.3x networking standards
- Auto-negotiation and auto MDI and MDIX on all ports
- Flow control support for full-duplex and half-duplex modes
- Typical power consumption of 9.9 W with energy-saving technology
How to use
Begin by securing the network switch into a standard 19-inch server rack or placing it on a stable, flat surface using the included mounting accessories. Connect the provided power cable to the rear power connector of the switch and plug it into a standard electrical outlet. Connect your network devices, such as computers, printers, or routers, to the RJ-45 ports on the front panel using standard Ethernet cables. The switch will automatically detect the connection speed and cable type, establishing a stable link without requiring any manual setup or software configuration.
What to consider before purchase
- Verify that your network requirements do not exceed the 10/100 Mbps speed limit provided by Fast Ethernet ports
- Ensure that you do not require Power over Ethernet functionality to power connected devices
- Confirm that your installation space accommodates a standard 19-inch rack-mountable 1U hardware form factor
- Check whether your network infrastructure benefits from an unmanaged plug-and-play device rather than a managed switch
Always ensure proper ventilation around the rack-mounted switch to prevent overheating, and verify that total network traffic aligns with the capabilities of Fast Ethernet speeds to maintain optimal performance.
Features
- Power over Ethernet (PoE):
- No
- Power supply included:
- Yes
- Power source:
- AC
- Stackable:
- No
- Rack mounting:
- Yes
- Switching capacity:
- 9.6 Gbit/s
- MAC address table:
- 8000 entries
- 10G support:
- No
- Installed SFP+ modules quantity:
- 0
- Installed SFP modules quantity:
- 0
- Basic switching RJ-45 Ethernet ports type:
- Fast Ethernet (10/100)
- Basic switching RJ-45 Ethernet ports quantity:
- 48
- Switch type:
- Unmanaged
- Networking standards:
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Instructions
Stock data
| Warehouse | Stock | Delivery to the store | Store Price | |
| BT17 | 7 | 30.11.2026 | 108.49 € | Add to cart |
- 108.49 €Stock: 7Delivery Date: 30.11.2026Warehouse: BT17Add to cart
| Warehouse | Stock | Delivery to the store | Store Price | |
| EU9 | 1 | 07.12.2026 | 145.99 € | Add to cart |
| WH109 | 4 | 21.12.2026 | 147.99 € | Add to cart |
- 145.99 €Stock: 1Delivery Date: 07.12.2026Warehouse: EU9Add to cart
- 147.99 €Stock: 4Delivery Date: 21.12.2026Warehouse: WH109Add to cart
Customer reviews
Customer questions
How much does the TP-Link TL-SF1048 48-Port Fast Ethernet Switch cost, and is it available for purchase?
If I order this product today, when will I receive my order?
What payment options are available?
Can TP-Link TL-SF1048 48-Port Fast Ethernet Switch be purchased with a lease?
- Select the product on the website and add it to your cart;
- When placing your order, choose the payment method “Installments”;
- Fill in the required details for the lending partner;
- Receive a decision within a few minutes.



