Galvanic Isolator / Video Separator Triton HSO-1F-ECO for AHD, HD-CVI, HD-TVI

Triton HSO-1F-ECO is a galvanic isolator and video separator designed for analogue HD video systems using AHD, HD‑CVI and HD‑TVI standards. The device provides electrical isolation between the camera and the recorder to eliminate ground loops and reduce interference, helping to maintain stable video transmission and clearer images in CCTV installations. Its compact design allows integration into camera housings or junction boxes where improved signal integrity is required.

Advantages

The isolator prevents ground loop currents and minimizes induced noise on the video signal, which reduces visible interference such as rolling bars or hum on recorded footage. It preserves signal levels and timing for AHD, HD‑CVI and HD‑TVI formats without active signal processing, ensuring compatibility with a wide range of analogue HD cameras and DVRs. The passive construction provides long-term reliability with no configuration required.

Suitable for

• CCTV systems using AHD, HD‑CVI or HD‑TVI analogue HD cameras
• Installations where cameras and recorders are powered from different earth potentials
• Sites experiencing video noise or ground loop interference
• Retrofit projects to improve signal quality without changing cameras or recorders

Key specifications

• Compatible signal standards: AHD, HD‑CVI, HD‑TVI
• Function: galvanic isolation and video separation for one video channel
• Signal path: passive isolation, maintains video levels for analogue HD signals
• Form factor: compact module suitable for in-line installation near camera or recorder
• Connections: BNC-type video input and output interfaces (standard CCTV connectors)
• Operating environment: designed for typical CCTV indoor and sheltered outdoor installations

How to use

Install the Triton HSO-1F-ECO in the video line between the camera and the recorder, connecting the camera video output to the isolator input and the isolator output to the DVR video input using standard BNC cabling. Ensure connections are secure and use appropriate cable routing to protect against moisture and mechanical damage. No electronic configuration is required; once connected the device provides immediate galvanic separation and improved signal integrity.

Usage recommendations

For best results, place the isolator close to the camera or inside the camera housing if space and ventilation allow. Verify camera and DVR compatibility with AHD, HD‑CVI or HD‑TVI formats before installation and inspect video feed after installation to confirm interference reduction. In environments with severe electrical disturbances, combine the isolator with properly grounded power supplies and surge protection devices.