Rotary hammer TRYTON TMM1200X — 1200 W power

The TRYTON TMM1200X is an electric rotary hammer with 1200 W nominal power designed for drilling, chiselling and light demolition in masonry, concrete and stone. It combines rotary drilling with a strong percussion mechanism to deliver higher impact force for efficient hole making and breaking tasks. The tool is intended for renovation, construction and DIY projects where sustained power and reliable hammer action are required.

Advantages

The rotary hammer offers a balance of power and controllability, enabling fast drilling in hard materials while maintaining operator comfort. Its robust motor provides continuous performance under load, and the percussion action improves chipping and chiselling efficiency. The tool supports a variety of applications through straightforward mode selection and a durable construction designed to withstand frequent use on job sites.

Suitable for

• Drilling holes in concrete, brick and stone for anchors and fasteners
• Chiselling and removing plaster, tile or mortar
• Light demolition and adjustment works during renovation
• Installation tasks requiring hammer drilling such as mounting electrical boxes or piping

Key specifications

• Rated input power: 1200 W
• Operating modes: rotation with percussion, percussion-only (chisel), rotation-only
• Suitable bit system: SDS-plus compatible chuck for quick bit changes
• Impact energy: designed to deliver high-impact blows suitable for masonry and concrete
• Application materials: concrete, brick, stone and similar masonry

How to use

Select the appropriate drill bit or chisel and insert it into the SDS-plus compatible chuck until it locks. Choose the required operating mode depending on the task — use rotation with percussion for drilling, percussion-only for chiselling or rotation-only for standard drilling in softer materials. Hold the tool firmly with both hands, position at the marked point and start at low speed to ensure correct alignment, then increase speed as needed. Apply steady, moderate pressure; avoid forcing the tool. After use, allow the motor to run briefly without load to clear dust, then remove the bit and clean the chuck and vents.

Usage recommendations

For safe and efficient operation, wear appropriate personal protective equipment including eye protection, hearing protection and gloves. Use the correct drill bit or chisel for the material and secure workpieces when possible. If drilling deep holes or prolonged use is required, periodically withdraw the bit to clear dust and prevent overheating. Follow local electrical safety rules and disconnect the tool from the power source before changing accessories or performing maintenance.