Demolition hammer TRYTON TMM1600X SDS‑Max, 1600 W, 25 J, 11 kg, black/blue

TRYTON TMM1600X is a demolition hammer with an SDS‑Max chuck, designed for heavy chiselling and demolition work. It is powered by a 1600 W AC motor and delivers a maximum impact energy of 25 J. The tool weighs 11 kg and is finished in black and blue. It is built with Class II protection and is intended for connection to a 230–240 V mains supply. Measured noise levels are a sound power of 105 dB and a sound pressure of 90.7 dB.

Advantages

The SDS‑Max chuck provides secure tool retention and fast bit changes, while the 1600 W motor and 25 J impact energy enable efficient removal of concrete and masonry. An anti‑vibration chuck reduces transmitted vibration to the user. The package includes both flat and pointed chisels for different demolition tasks, and bit positioning ensures accurate work. Designed for professional use, the tool balances power and handling in an 11 kg housing.

Suitable for

• Heavy chiselling and breaking of concrete and reinforced concrete
• Removing masonry, tiles and plaster layers
• Cutting out openings and channels in walls and floors
• Demolition work on construction and renovation sites

Key specifications

• Motor power: 1600 W
• Maximum impact energy: 25 J
• Chuck type: SDS‑Max
• Weight: 11 kg
• Protection class: Class II
• Rated voltage: 230–240 V
• Sound power level: 105 dB
• Sound pressure level: 90.7 dB
• Included accessories: flat chisel and pointed chisel
• Colour: black and blue

How to use

Before use, verify the mains voltage is 230–240 V and inspect the tool, power cord and accessories for damage. Fit an SDS‑Max bit until it locks into position and select the appropriate chisel for the task. Hold the tool firmly with both hands, align the chisel with the work surface and start at low speed to establish the correct position, then increase to the required impact frequency. Apply consistent forward pressure; allow the tool to deliver impacts without forcing it. After use, disconnect from the mains, remove the bit and clean the tool and accessories.

Usage recommendations

Use appropriate personal protective equipment including hearing protection, eye protection and gloves due to high noise and flying debris. For prolonged work, take regular breaks to reduce fatigue and monitor the tool for overheating. Use only SDS‑Max bits in good condition and follow local safety and disposal regulations for removed material.