Tytan Wood Preservative Liquid 1 L is a water-based protective treatment formulated to penetrate timber and wooden surfaces to reduce risk of biological degradation. Designed for both exterior and interior use, this product prepares wood prior to final finishing and helps extend the service life of fences, garden furniture, cladding, beams and other wooden elements.
Advantages
The preservative penetrates into the wood structure to provide baseline protection against mould, fungi and wood-decaying organisms while maintaining breathability. Its water-based formula allows for easier application, faster drying times than solvent-based alternatives, and lower odour during use. The product is suitable for use under paints, stains and other finishing systems as a preparatory treatment.
Suitable for
- Exterior wooden elements such as fences, decking components and cladding
- Garden furniture and outdoor joinery
- Interior wooden surfaces that require preventive biological protection
- Structural timber like beams and rafters prior to painting or staining
When it may not be suitable
This treatment is intended as a preparatory preservative and does not replace film-forming finishes such as exterior paints or varnishes where surface appearance and colour are the priority. It may not provide sufficient aesthetic coverage or UV protection on its own and should be overcoated with appropriate finishing products for long-term visual protection.
Key specifications
- Form: water-based liquid
- Volume: 1 litre
- Intended application: penetration and biological protection of timber
- Use locations: interior and exterior wood
- Compatibility: suitable as a base treatment before painting, staining or varnishing
How to use
Ensure the wooden surface is clean, dry and free of loose material, dust or active mould. Shake or stir the container before use. Apply the preservative evenly with a brush, roller or low-pressure sprayer, working along the grain to promote penetration. Allow sufficient penetration time and drying between coats; if a second coat is required, apply it after the first coat has dried. After treatment and drying, proceed with the chosen paint, stain or varnish according to the finishing product instructions.
What to consider before purchase
- Intended final finish: confirm whether you will apply paint, stain or varnish after treatment
- Surface condition: heavily weathered or damaged wood may require sanding or replacement before treatment
- Application method: brush, roller or sprayer suitability and required drying conditions
Usage recommendations
For best results, apply the preservative to clean, dry wood in temperatures recommended on the product label, ensure good ventilation during application and allow full drying before applying finishing coats. Test compatibility with your chosen paint or stain on a small area before full application.
