Sealant cartridge Tytan AKRYL SUPER PLUS white 280 ml

Tytan AKRYL SUPER PLUS white 280 ml is an acrylic sealant designed for filling, sealing and finishing joints, gaps and hairline cracks in both interior and exterior environments. Supplied in a 280 ml cartridge, this product creates a flexible, paintable seal that adheres to masonry, plaster, wood and painted surfaces. It is formulated for finishing work around window and door frames, skirting boards and for small repair tasks where a neat, paintable finish is required.

Advantages

This acrylic sealant cures to a flexible, long-lasting bead that accepts overpainting, enabling seamless colour matching after application. It bonds well to a range of common building substrates including plaster, concrete, wood and previously painted surfaces, reducing the need for separate primer in many cases. The cartridge format is compatible with standard caulking guns for controlled dispensing and neat application. The product is suitable for use in both interior and protected exterior locations where movement accommodation and a paintable finish are important.

Suitable for

• Sealing and finishing joints around window and door frames
• Filling gaps between skirting boards and walls
• Repairing hairline cracks in plaster and masonry
• Interior trim and finishing work where paintability is required
• Minor exterior repairs in protected or non-immersed areas

Key specifications

• Type: Acrylic sealant
• Colour: White
• Volume: 280 ml cartridge
• Paintability: Paintable after curing
• Compatibility: Suitable for masonry, plaster, wood and painted surfaces
• Application temperature range: suitable for typical indoor and mild outdoor conditions (follow manufacturer guidance on temperature limits)
• Bead properties: Flexible after curing to accommodate minor joint movement

How to use

Prepare surfaces by removing dust, loose material, grease and old sealant residues. Ensure surfaces are dry and stable prior to application. Cut the cartridge tip to the desired bead size and fit into a standard caulking gun. Apply an even bead of sealant into the joint, pressing the sealant into place for good contact with both sides of the gap. Smooth the bead with a wet tool or spatula within the skin time to create a neat finish. Allow the sealant to cure fully before painting; curing time depends on bead size and ambient conditions. Clean tools and uncured sealant with water.

Usage recommendations

For best results, apply at moderate temperatures and avoid use in heavy rain or on surfaces exposed to continuous moisture until fully cured. Test paint compatibility on a small area if using alkyd or solvent-based paints. Store cartridges in a cool, dry place and follow local disposal regulations for empty containers.