Ubiquiti G3 Intercom Entrance control terminal Black 7" Display 1024x600

The Ubiquiti G3 Intercom Entrance control terminal Black 7" Display 1024x600 is an access-point device designed for entrance control and intercom systems. The terminal features a 7-inch flat display with a 1024 x 600 pixel resolution, supports Ethernet LAN data rates up to 1000 Mbit/s, and operates at 48 V with a maximum power consumption of 13 W. The device measures 113.7 mm (width) × 28.3 mm (depth) × 324.8 mm (height), and its form factor is intended for mounting at entry points where visual interaction and network connectivity are required.

Advantages

The device combines a high-resolution 7" display with gigabit Ethernet support for responsive video and data transmission. Its 48 V operation and a capped power consumption of 13 W provide predictable power requirements for integration with standard PoE or compatible power systems. The compact dimensions allow installation in a variety of entrance control layouts where space is limited, while the black finish is suitable for discreet placement. The terminal is produced by UBIQUITI and carries the manufacturer reference UA-G3-INTERCOM and EAN 810177161622 for product identification.

Suitable for

• Residential building entry panels and apartment intercom systems
• Small and medium commercial office entrances requiring visual intercom
• Renovation projects where a compact, networked entrance terminal is needed
• Locations that use centralized network management and gigabit LAN connections

Key specifications

• Display: 7" flat, 1024 x 600 pixels
• Network: Ethernet LAN, up to 1000 Mbit/s
• Power: 48 V operating voltage, max power consumption 13 W
• Dimensions: 113.7 mm (W) × 28.3 mm (D) × 324.8 mm (H)
• Brand: UBIQUITI; MPN: UA-G3-INTERCOM; EAN: 810177161622

How to use

Install the Ubiquiti G3 Intercom at the designated entrance location following local electrical and mounting regulations. Connect the terminal to the network using a suitable Ethernet connection that supports up to 1000 Mbit/s. Provide 48 V power via the approved power source or PoE system compatible with the device's power requirements; ensure the available power budget accommodates the maximum consumption of 13 W. After physical installation and power-up, integrate the terminal into the building's access control and intercom system according to the integrator or manufacturer's setup procedure.

Usage recommendations

Place the terminal where the 7" display is easily visible to users and where a reliable gigabit Ethernet connection and stable 48 V power are available. Verify network configuration and power delivery before finalizing the installation to ensure consistent performance and to prevent interruptions caused by insufficient power or low-bandwidth connections.