UN angled flexible connector cable with plug 3×1.5 mm², 3 m, white

Angled connector cable by UN with an integrated right-angle plug, three conductors of 1.5 mm² cross-section and a total length of 3 m. The white flexible cable is designed to provide a compact cable exit where space behind appliances or equipment is limited. It is suitable for household and light commercial electrical connections, offering straightforward routing for appliances, lighting fixtures and extension circuits that require a low-profile plug orientation.

Advantages

The right-angle plug reduces projection from the wall and allows closer placement of furniture and devices. A 3×1.5 mm² conductor arrangement supports typical single-phase connections for many appliances and lighting circuits. The integrated connector assembly eliminates the need for separate plug and cable termination steps, simplifying installation. The flexible outer sheath aids in routing through tight spaces while the fixed 3 m length provides extended reach without additional splices.

Suitable for

• Connecting household appliances with low-to-moderate power requirements
• Installing under-cabinet or recessed lighting where rear clearance is limited
• Powering small motors, pumps or fans in light commercial settings with compatible ratings
• Temporary extension or replacement of existing angled plug leads

Key specifications

• Conductor count: 3 cores (live, neutral, earth)
• Conductor cross-section: 1.5 mm² per core
• Cable length: 3 m
• Plug orientation: right-angle (angled) plug
• Sheath colour: white
• Cable type: flexible multi-core cable suitable for fixed and semi-flexible routing

How to use

Verify that the cable specifications match the voltage and current requirements of the intended appliance or circuit. Insert the right-angle plug into a compatible mains socket ensuring correct earthing connection. Route the cable along a protected path, avoiding sharp edges, hot surfaces and locations with mechanical strain. Do not exceed the rated current for 1.5 mm² conductors and avoid modifications to the integrated plug assembly. If hardwiring or additional terminations are required, disconnect power and consult a qualified electrician.

Usage recommendations

Use the angled connector cable for applications where rear clearance is limited and a low-profile plug orientation is beneficial. Regularly inspect the sheath and plug for damage, and replace the cable if insulation is compromised. For installations requiring higher current capacity or permanent concealed wiring, select a cable and termination method that meet local electrical codes and consult a professional installer.