Spray paint Unimet MTP 9003P – 400 ml, white gloss

Unimet MTP 9003P – 400 ml, white gloss is a ready-to-use aerosol spray paint formulated for rapid touch-ups, decorative coatings and small repair jobs. The 400 ml can delivers a uniform white glossy finish that adheres to metal, wood, suitable plastics and other surfaces compatible with solvent-based spray paints. It is intended for both indoor and outdoor applications where a smooth, reflective surface is required and quick drying is beneficial.

Advantages

This spray paint provides an even, high-gloss white layer with good hiding power and smooth leveling to reduce visible brush or application marks. The aerosol format allows controlled application for small to medium-sized areas and quick spot repairs. It dries rapidly to handle and resists light wear when used on appropriate substrates. The formulation is convenient for DIY, maintenance and restoration tasks where a consistent glossy appearance is desired.

Suitable for

• Touch-up painting of metal furniture, radiators and fixtures
• Small decorative coatings on wood trim, moldings and frames
• Repair and refinishing of compatible plastic parts and housings
• Indoor and outdoor maintenance where a white gloss finish is required

When it may not be suitable

This product is not intended for large-scale painting jobs where spray guns or brush-and-roller systems are more economical. It may not bond well to plastics that are not compatible with solvent-based paints, nor to oily, dirty or highly flexible surfaces without proper preparation and priming. For high-temperature surfaces, structural coatings or heavy wear environments, consider specialized high-temperature or industrial coatings instead.

Key specifications

• Form: aerosol spray can, 400 ml
• Finish: white, gloss
• Typical uses: metal, wood, compatible plastics, mixed substrates
• Application: spray
• Drying: fast drying to touch (typical for solvent-based aerosols)
• Suitability: indoor and outdoor use

How to use

Ensure the surface is clean, dry and free of rust, grease, dust and loose paint. For best results, sand glossy or uneven areas and apply a suitable primer when necessary for improved adhesion and corrosion protection. Shake the can vigorously for at least one minute after the mixing ball moves freely. Hold the can 20–30 cm from the surface and apply several light, even coats, allowing short flash-off time between passes to avoid runs. Allow the final coat to dry according to ambient conditions before handling or exposing to heavy use.

What to consider before purchase

• Verify substrate compatibility with solvent-based aerosol paints and use a primer if needed
• Estimate the required quantity—one 400 ml can is suitable for small repairs and touch-ups, not large areas
• Consider ventilation and safety: use in well-ventilated areas and follow instructions on flammability and protective equipment

Usage recommendations

Store and use the product at moderate temperatures and avoid spraying in direct sunlight, high humidity or strong winds. Test on a small inconspicuous area to confirm adhesion and color match before full application. Dispose of the empty can according to local hazardous waste regulations.