Release Agent Liquid Unimet EKOBET 0-10, 10 L

Unimet EKOBET 0-10 is a 10 L release agent liquid formulated to prevent adhesion between fresh concrete and formwork or molds. Designed for construction sites and precast production, this product creates a controlled film that facilitates demolding, protects concrete surfaces during curing, and reduces time spent on formwork cleaning. The liquid is suitable for both manual wiping and spray application where a consistent, non-staining release layer is required.

Advantages

The release agent forms a uniform, easily breakable layer that minimizes surface defects and air pockets on cured concrete. Its composition reduces sticking to formwork and molds, which extends the service life of formwork and lowers maintenance effort. The product is packaged in a 10 L container for convenient storage and handling on site. It is formulated to leave minimal residue and to support reproducible demolding results in repeated casting cycles.

Suitable for

• Concrete formwork in cast-in-place construction
• Precast concrete elements and panel production
• Molds for architectural concrete and decorative elements
• Timber, metal or composite formwork surfaces requiring controlled release

Key specifications

• Volume: 10 litres
• Form: liquid for manual or spray application
• Function: anti-adhesive / release layer to facilitate demolding
• Compatibility: suitable for use on common formwork materials such as wood, steel and composite molds
• Residue: designed to leave minimal, non-staining residue on concrete surfaces

How to use

Apply Unimet EKOBET 0-10 to clean, dry formwork surfaces before placing concrete. For manual application, use a brush or lint-free cloth to spread a thin, even film ensuring full coverage of joint lines and corners. For spray application, use an appropriate low-pressure sprayer and maintain an even distance to avoid pooling. Allow a short flash-off time so the film becomes continuous but not wet before pouring concrete. Reapply between casting cycles or if the release layer is damaged or removed by cleaning.

Usage recommendations

Store the product in its original, closed container in a cool, frost-free place. Avoid applying in heavy rain or when formwork temperatures are below manufacturer-recommended limits. Test the release agent on a small area when using on sensitive textured or colored formwork to confirm it does not affect the finish. Follow local safety data sheet instructions for handling, ventilation and personal protective equipment.