Uni-T UT211B Precision Clamp Meter 60A

The Uni-T UT211B is a high-precision digital clamp meter engineered for professionals who require accurate measurements of low AC and DC currents up to 60A. Its compact and lightweight construction makes it an ideal instrument for technicians working in confined spaces, such as inside electrical cabinets or complex electronic assemblies. By providing high resolution and reliable performance, this device ensures that sensitive circuits and power systems are monitored with the necessary precision for effective troubleshooting and maintenance.

Advantages

This clamp meter stands out due to its ability to measure small current values with a resolution of 0.01A, which is critical for sensitive electronic applications. The inclusion of True RMS technology ensures accurate readings even with non-sinusoidal waveforms, while the VFC mode allows for stable measurements in environments with variable frequency drives. Its ergonomic design, combined with a clear backlit display and automatic range switching, significantly enhances user efficiency and reduces the time required for diagnostic tasks in the field.

Suitable for

• Electrical maintenance and troubleshooting
• Testing photovoltaic and solar power systems
• Diagnostic work on electric vehicle circuits
• Precise monitoring of low-current electronic components
• General electrical installation and repair

When it may not be suitable

The UT211B is specifically optimized for low-current applications up to 60A. It is not suitable for high-power industrial environments where currents exceed this range, such as heavy-duty motor testing or main power distribution lines requiring higher amperage capacity.

Key specifications

• AC/DC Current: up to 60A
• AC/DC Voltage: up to 600V
• Resistance: up to 60MΩ
• Capacitance: up to 62mF
• Display: 6000-count LCD with backlight
• Safety features: True RMS, NCV (Non-Contact Voltage detection), VFC mode
• Power: 2 x 1.5V batteries
• Dimensions: 175mm x 60mm x 33.5mm
• Weight: 170g

How to use

To begin using the device, insert the provided batteries into the compartment. Turn the rotary switch to the desired measurement function. For current measurements, open the clamp jaws and enclose a single conductor. For voltage or resistance measurements, connect the included test leads to the input jacks and touch the probes to the test points. Use the Data Hold button to freeze the reading on the screen if necessary, and utilize the Zero mode to calibrate the meter before taking DC current measurements to ensure maximum accuracy.

What to consider before purchase

• Verify that the 60A current range meets your specific project requirements.
• Ensure the device is used within its rated voltage and current limits for safety.
• Consider the physical size of the clamp jaws to ensure they fit around your target cables.

Usage recommendations

Always perform a continuity test or check the meter on a known voltage source before starting critical measurements to ensure the device and test leads are functioning correctly. Store the meter in the provided carrying case when not in use to protect the sensor jaws from debris and damage.