USB Lightning cable usams U48 SJ423USB02 1.2 m 2A braided with LED indicator, green

Braided usams U48 Lightning cable (model SJ423USB02) is a 1.2 m data and charging cable designed for Apple devices with a Lightning port. The cable supports up to 2A output for faster charging and also carries data for syncing. It features a woven exterior and aluminum alloy connectors for increased mechanical durability. An integrated LED digital display shows real-time voltage, current and elapsed charging time, and a one-button timer allows setting a charging duration from 1 to 10 hours with automatic power-off to reduce the risk of overcharging.

Advantages

The braided exterior resists abrasion and bending, extending cable lifetime compared with plain PVC cords. The tin-plated copper core offers low resistance and supports up to 2A current for reliable charging and data transfer. The built-in LED display provides immediate visibility of voltage, current and charging duration, while the programmable timer enables automatic shutoff after the set interval to help prevent prolonged charging. Aluminum alloy plugs add connector strength and reduce wear at contact points.

Suitable for

• Charging iPhone and iPad devices with Lightning connector at home or office
• Data syncing between Lightning devices and computers
• Timed overnight charging to reduce battery stress using the 1–10 hour timer
• Everyday portable use where a durable braided cable is preferred

Key specifications

• Cable length: 1.2 m
• Connector: Lightning (for Apple devices)
• Maximum output current: 2 A (Max)
• Core material: tin-plated copper conductor
• Exterior: braided fabric for improved wear resistance
• Housing: aluminum alloy plug
• Integrated LED display: shows voltage, current and charging time
• Timer: set charging duration from 1 to 10 hours with automatic power-off

How to use

Connect the USB end to a compatible power adapter or USB port and plug the Lightning connector into the Apple device. Observe the LED display to check real-time voltage, current and elapsed charging time. Use the button on the cable to set the desired charging duration: click once to increase the timer by 1 hour, double click to decrease by 1 hour, and repeat until the required time (1–10 hours) is set. When the selected time expires, the cable will automatically cut power to help prevent overcharging. If charging current drops below approximately 60 mA, the display will show voltage and set time only and will switch off after one minute.

Usage recommendations

Use with a USB power adapter rated for the device and the cable's 2A capability. Avoid sharp bends near the connectors and disconnect the cable by the plug rather than by pulling the braided cord. For overnight timed charging, set the timer before sleep and verify the selected duration on the display. Do not use the cable with damaged connectors or frayed sections; replace if outer braid or inner conductors are compromised.