Filter element USTM NET 10 Nylon model 4302277

Replacement nylon mesh filter element for mechanical removal of suspended solids. The nylon mesh captures debris on the outer surface, allowing particles to fall to the bottom of the filter housing for easy cleaning. Designed to remove insoluble contaminants and larger suspensions from water, it protects plumbing and downstream filtration stages from sand and similar particles. Typically used for basic cold water protection and compatible with most 10-inch filter housings regardless of manufacturer. Reusable until the element is physically damaged.

The filter provides filtration down to approximately 70 microns, sufficient to remove sand and other larger impurities while maintaining low pressure drop and high flow. Maximum effective flow rate: 30–40 L/min. Dimensions: 10 inches height, 2.5 inches diameter. Model: USTM NET 10 Nylon (MPN 4302277, EAN 5907644302277).

Advantages

The nylon mesh element is reusable, simple to clean, and compatible with standard 10-inch housings. It offers a balance of particle retention (≈70 µm) and minimal hydraulic resistance, ensuring reliable protection of water installations and downstream filters without significantly reducing flow.

Suitable for

• Basic cold water protection in residential and commercial systems
• Pre-filtration before finer cartridges or membrane stages
• Protection of pumps, valves and piping from sand and coarse sediments
• Applications requiring a reusable mechanical filter element

Key specifications

• Material: nylon mesh
• Filtration rating: approx. 70 microns
• Max effective flow: 30–40 L/min
• Dimensions: 10" height × 2.5" diameter
• Compatibility: standard 10-inch filter housings
• Brand / MPN / EAN: USTM / 4302277 / 5907644302277

How to use

Install the element into a compatible 10-inch filter housing following the housing manufacturer’s instructions. Rinse or backflush the element to remove accumulated debris; if heavy fouling occurs, remove and manually clean the mesh with water. Inspect the element regularly for physical damage and replace it when torn or degraded. Ensure correct sealing of the housing to prevent bypass.

Usage recommendations

Use as a pre-filter in systems where removal of sand and coarse particles is required. Regular inspection and cleaning will extend service life; replace the element if mesh integrity is compromised.