The USTM PP20M PLUS is a high-quality 10-inch sediment filter cartridge engineered from durable polypropylene yarn. Designed to provide efficient mechanical filtration, this cartridge effectively captures suspended solids, sand, silt, and rust particles as small as 20 microns. It serves as a critical first stage of water treatment, ensuring that water entering your plumbing system is free from abrasive debris that could otherwise damage sensitive equipment or appliances.
Advantages
The primary benefit of this polypropylene yarn cartridge is its robust construction, which allows for a high flow rate of up to 1500 liters per hour without compromising filtration efficiency. Its depth-filtration design ensures that particles are trapped throughout the entire thickness of the filter media, providing a longer service life compared to surface-only filters. By removing mechanical impurities, it protects downstream components such as carbon filters, water softeners, and household appliances from premature wear and clogging.
Suitable for
- Residential drinking water pre-filtration
- Protection of household appliances like washing machines and dishwashers
- Commercial plumbing systems requiring sediment removal
- Pre-treatment for reverse osmosis or carbon filtration systems
When it may not be suitable
This cartridge is designed specifically for mechanical sediment filtration and will not remove dissolved chemicals, heavy metals, chlorine, or bacteria from the water. It is not intended for use with microbiologically unsafe water or water of unknown quality without adequate disinfection.
Key specifications
- Filtration rating: 20 microns
- Dimensions: 255 mm length, 55 mm diameter
- Operating temperature range: 2°C to 45°C
- Maximum flow rate: 1500 l/h
- Material: Polypropylene yarn
How to use
To install the cartridge, first shut off the water supply to the filter housing and release any remaining pressure. Unscrew the housing bowl, remove the old cartridge, and clean the inside of the housing. Insert the new USTM PP20M PLUS cartridge, ensuring it is properly centered. Reassemble the housing and tighten it securely. Once installed, open the water supply and check for leaks.
What to consider before purchase
- Verify that your existing filter housing is compatible with standard 10-inch cartridges.
- Ensure the water temperature does not exceed the 45°C limit.
- Check the dimensions of your housing to confirm the 55 mm diameter fits correctly.
Usage recommendations: Before using the cartridge for the first time, flush it by running water through the system until any initial foaming or loose fibers disappear to ensure optimal water clarity.
