Wood Impregnator V33 Impregnator Classique Scandinavian Pine — preservative for exterior and interior wood, 1 L (MPN 108976)

V33 Impregnator Classique Scandinavian Pine is a wood preservative formulated to protect both exterior and interior timber. Designed to penetrate the wood grain, this product helps reduce the risk of moisture penetration, fungal decay and insect attack while leaving the natural appearance of the wood largely unchanged. It is intended to be applied prior to finishing coats on surfaces such as fences, cladding, garden furniture and joinery to extend service life and prepare the substrate for subsequent paints or stains.

Advantages

The impregnation formula penetrates deeply into the wood to provide preventative protection against biological degradation and moisture-related damage without forming a thick film on the surface. It is compatible with common finishing systems and can be used on both interior and exterior wood where preparation and protection are required before decorative coatings. The product maintains a natural timber look and supports longer intervals between maintenance cycles.

Suitable for

• Exterior timber such as fences, cladding and garden structures
• Garden and outdoor furniture made of softwood
• Interior joinery, beams and untreated woodwork requiring protection
• Preparation of wood prior to painting, staining or varnishing

Key specifications

• Form: penetrating liquid preservative suitable for pre-treatment
• Application: brush, spray or low-pressure methods on absorbent wood
• Compatibility: intended for use under common paint, stain and varnish systems
• Scope: formulated for both exterior and interior use on timber
• Volume: packaged in a 1 L container

How to use

Ensure the wood surface is clean, dry and free from dust, grease and loose material before application. Apply the impregnation evenly with a brush, roller or suitable spray equipment, working along the grain and ensuring good penetration into end grains and joints. Allow the product to dry fully according to ambient conditions before applying finishing coats such as paints, stains or varnishes. For highly weathered or dense wood species, a preliminary sanding or a further coat may be required to achieve adequate penetration.

Usage recommendations

Store and use the product in well-ventilated conditions and follow safety instructions on the label. Test compatibility with the chosen finishing system on a small area before full application. For exterior elements, plan treatments during dry weather and allow sufficient drying time between impregnation and topcoats to ensure optimal adhesion and protection.