V33 Haute Protection Oak wood impregnator, 0.75 L, is a ready-to-use protective treatment formulated to penetrate and protect interior and exterior wooden surfaces. The oak tint provides a subtle tone while the formulation soaks into the wood fibers to reduce moisture uptake, prevent early staining and improve the adherence of subsequent finishing coats. Designed for primary protection and preparatory impregnation, this product is suitable for doors, windows, fences and garden furniture where initial protection and stabilization of porous wood is required.
Advantages
The impregnator penetrates deeply to reinforce wood structure and limit water absorption without forming a surface film, helping to reduce the risk of swelling and discoloration. Its oak tint evens out the substrate’s appearance and facilitates uniform application of paints, varnishes or oil finishes applied later. The formulation is suitable for both interior and exterior use, providing an efficient base layer that prepares the wood for long-lasting topcoats and improves overall durability.
Suitable for
- Exterior doors and window frames
- Garden furniture and wooden terraces
- Wooden fences and gates
- Interior joinery requiring moisture protection before finishing
Key specifications
- Volume: 0.75 L
- Finish: translucent oak tint
- Application: brush, roller or cloth
- Suitable substrates: raw or previously sanded porous wood
- Use: interior and exterior protective impregnation and primer
- Drying behaviour: penetrative, not forming a continuous surface film
How to use
Ensure the wood surface is clean, dry and free of dust, grease or old loose coatings. Stir the product well before use. Apply evenly with a brush, roller or lint-free cloth following the wood grain. Allow sufficient penetration time, then remove any excess product with a clean cloth if necessary. For highly porous or weathered wood, a second coat may be applied after the first coat has penetrated and dried. After impregnation and drying, proceed with the chosen paint, varnish or oil according to the manufacturer’s instructions.
Usage recommendations
For best results, test the oak tint on a small inconspicuous area to check tone and absorption. Work in well-ventilated conditions and protect adjacent surfaces. Store in a cool, frost-free place and follow local disposal regulations for unused product and containers.
