Wood and stone impregnation V33 IMPREGNATOR HAUTE PROTECTION WHITE 10 L

V33 IMPREGNATOR HAUTE PROTECTION WHITE 10 L is a water-repellent impregnation formulated for porous substrates such as timber and masonry. The product penetrates deeply to consolidate fibres and mineral surfaces, reduce water absorption and limit staining while leaving a subtle white-toned finish that evens out appearance on pale supports. It is suitable for both exterior and interior applications where long-lasting protection against moisture and superficial dirt is required.

Advantages

This impregnator provides deep penetration to protect wood and stone from water ingress and capillary rise. The formulation reduces the risk of stains and helps maintain surface integrity by consolidating porous materials. The white-toned effect evens out variations in colour on light substrates and can act as a preparatory layer before decorative finishes. The product is ready for use with straightforward application and is compatible with common subsequent coatings when fully cured.

Suitable for

• Exterior wooden elements: cladding, fences, pergolas and garden furniture
• Masonry surfaces: rendered walls, concrete, natural and reconstituted stone
• Interior porous surfaces needing moisture protection and stain reduction
• Preparatory treatment before painting or applying decorative finishes

Key specifications

• Volume: 10 litres
• Finish: white-toned impregnation that slightly whitens or evens pale surfaces
• Application: brush, roller or low-pressure spray
• Substrate compatibility: porous wood and mineral surfaces
• Performance: water-repellent and stain-reducing impregnation

How to use

Ensure surfaces are clean, dry and free of loose material, dust, grease or existing flaking coatings. Stir the product thoroughly before use. Apply evenly using a brush, roller or low-pressure spray, working along the grain on wood and ensuring full saturation of the substrate. For very porous materials, a second coat may be applied after the first has penetrated and become tack-free. Allow adequate drying time and ventilation before applying any finishing paint or varnish. Follow safety instructions on the label, including use of protective gloves and eye protection as needed.

Usage recommendations

Apply in moderate weather conditions: avoid extreme heat, rain or freezing temperatures during application and drying. Test on a small inconspicuous area to check the white-toned effect and adhesion to the substrate before full application. For exterior installations, maintain treated surfaces periodically and reapply when water no longer beads on the surface.